water well tapered button bit

Brand Name:MTH

Model Number:34mm

Place of Origin:CHINA

...Tapered Button Bit Tapered Button Bit Description: Our tapered button bit was from high quality cemented carbide and produced with heat treatment technology,which connected with tapered drill rod well for air leg or hand-held rock drill machine for drilling holes in gold and coal mining,marble and granite quarries,stone project, tunnel, water conservancy,etc. Tapered Button Bit Product Characteristic: 1. Button

Brand Name:MIROC by KSQ

Model Number:BS438-7D-23

Place of Origin:China (Mainland)

..., earth-rock excavation, water wells, pile foundation, and civil engineering project etc. Product Description: The Tapered Button Bits are connected with the tapered rods through taper to finish drilling work. The Tapered Button Bits are mainly used in

Place of Origin:China

Brand Name:Jinquan

Model Number:Threaded & Tapered

34mm Tapered Button Bits: Taper Degree: 6°, 7°, 11°, 12° Diameter: 30mm, 32mm, 33mm, 34mm, 36mm, 38mm, 40mm, 41mm, 42mm Buttons: 4, 5, 6, 7, 8 Flushing Water Hole Nos.: 1, 2, 3 Skirt: Short, Long

Brand Name:MING

Model Number:MZ0737-7

Place of Origin:CHINA

... button Matched connection: 7 degree taper Diameter: 37mm KINGDRILLING DTH taper drill bit description: Through the taper connection on the drill bit and drill pipe, the tapered button drill bit is mostly used in conjunction with a tapered drill pipe and

Brand Name:SOLLROC

Model Number:32mm-43mm

Place of Origin:China

.../32/33/34/35/36/37/38/40/42/48/50/55mm Tapered button bits:28/29/30/32/33/34/35/36/37/38/40/41/42/45mm Taper Angle (Degree):4 degree/ 6 degree/ 7 degree/

Brand Name:QIDELI

Model Number:H22/H25

Place of Origin:PUTIAN FUJIAN CHINA

...buttons taper drill bits cold pressing and hot set type button bits PRODUCT INTRODUCTION Tapered Button Bits is suitable for mining,quarring,tunneling and so on. It is widely used for gound quarring and underground drilling. 1. Our button bits is made with supper quality carbide and aloy steel. 2. After our mature heat treatment process, the performance of the product has reached the best state.Our bits...

Place of Origin:China

Brand Name:EST

Model Number:all types

...buttons hot pressed on bits bodies, Tapered Button Bits have a very good drilling performance and long life time. Different diameters and taper degrees are available to suit different applications in mining, quarrying etc. We can supply long skirt and short skirt Tapered Button Bits. Comparing with tapered chisel bits and tapered cross bits, button bits...

Brand Name:MIROC

Model Number:Taper Button Bit

Place of Origin:China

...air leg or hand held jack hammer driller in quarrying,and mining. Basic Information: Taper drill bit- Taper 7° Taper, 11°, Taper 12° Product Name: mining tungsten carbides taper button rock drill tool bit Types Tapered chisel bits, Tapered cross bits,

Brand Name:SUVEC

Model Number:tapered button bits

Place of Origin:China

...Tapered Drill Bit 7 Buttons 38mm 36mm 34mm Taper Button Bits Tapered drill bits are widely used in mining and quarrying, with the advantages of higher driving efficiency, long service life, better powder exhausting and easier bit back, which combine well anti-wear and anti-impact carbide butttons and high-performance steel together. Our Tapered drill bits...

Brand Name:OED/OEM

Model Number:Q7-38-1122-50

Place of Origin:China

...Tapered Button Bit Drill Bit for Granite Rock Drill Head 7 Semi-Ballistic Buttons, 2 water holes on front, 1 one on side: Tapered design with copper Tapered Bits Description: (1)Connect shank Size: Φ19, Φ22, Φ25 at most (2)Bit Diameter: 32mm,34mm,36mm, 38mm,40mm (3)Tapered connection: 6 degree, 7 degree, 11 degree, 12 degree etc. (4)Material: Alloy Steel Bar 45CrNiMoV, Tungsten Carbide Tips YK05 or T6. (5)Button...

Brand Name:HZJX

Model Number:32 mm 34 mm 36 mm 38 mm 41 mm

Place of Origin:China

... drill bits with a wide selection of head diameters from 26mm to 48mm . With carbide buttons hot pressed on the bit skirts , tapered button bits have a good drilling performance and are excellent in longevity . We manufacture various tapered button bits in

Brand Name:JCDRILL

Model Number:36mm

Place of Origin:China

... bit as long hole bit to use taper match with jack hammer bit with rod to be used for air leg or hand held jack hammer driller in quarrying, and mining. Tapered Quarry Button Rock Drill Bits 40mm 41mm 45mm With higher strength of tungsten carbide as the

Brand Name:Kinglong drilling

Model Number:Tapered Button Bits

Place of Origin:China

Tapered Button Bits: Taper Degree: 6°, 7°, 11°, 12° Diameter: 30mm, 32mm, 33mm, 34mm, 36mm, 38mm, 40mm, 41mm, 42mm Buttons: 4, 5, 6, 7, 8 Flushing Water Hole Nos.: 1, 2, 3 Skirt: Short, Long The Tapered Button Bits are connected with the tapered rods through taper to finish drilling work. The Tapered Button Bits...

Brand Name:New Diamond

Model Number:T45

Place of Origin:Hunan, China (Mainland)

...tapered chisel bits and tapered cross bits, button bits has higher technology, much longer primary drilling time and higher drilling efficiency. According to the tungsten carbide insert, tapered button bits can be divided into the types of hemispherical, conical andparabolic button, etc. Thread button drill bits...

Place of Origin:China

Brand Name:SANSUNG

Model Number:Taper Button Bit

... primary drilling time and higher drilling efficiency, so that the button bit is popular among the users. Our taper button bit is made of high quality raw material through special heat treatment, which ensures the high drilling performance. At present,

Brand Name:OED or OEM

Model Number:Q8-34-1222-65

Place of Origin:China

7 Dregree Tapered Button Carbide Rock Drilling Tools Bits Diameter From 24mm To 48mm Q8-34-1222-65 specification: Drill bit diameter Ø34mm Length:65mm Carbide Button: 8pcs Button Shape: ballistc Tapered degree:12° Water (flushing) holes: Front 2pcs, side...