tapered button bit iso 9001

Brand Name:MTH

Model Number:64mm T38

Place of Origin:CHINA

64mm T38 Tungsten Carbide Thread Button Bit, Thread Button Bit Application: Thread button bits are made by high quality alloy steel bar and tungsten carbides. Under the process of heat treatment. Minetech’s drilling tools are tested in various working ...

Brand Name:MIRCO

Model Number:11 Degrees Tapered Button Bit

Place of Origin:China

... bit. with carbide buttons hot pressed on bits bodies, it has good performace sna life time. usually used for middle-hard to very hard rock formation. Including: Tapered button bits, Chisel bits, Cross bits Diameter: 26mm to 46mm Degree: 7°, 11°, 12°

Brand Name:MING

Model Number:MZ0737-7

Place of Origin:CHINA

... button Matched connection: 7 degree taper Diameter: 37mm KINGDRILLING DTH taper drill bit description: Through the taper connection on the drill bit and drill pipe, the tapered button drill bit is mostly used in conjunction with a tapered drill pipe and

Brand Name:SOLLROC

Model Number:32mm-43mm

Place of Origin:China

.../32/33/34/35/36/37/38/40/42/48/50/55mm Tapered button bits:28/29/30/32/33/34/35/36/37/38/40/41/42/45mm Taper Angle (Degree):4 degree/ 6 degree/ 7 degree/

Place of Origin:China

Brand Name:Jinquan

Model Number:Threaded & Tapered

...Tapered Button Bits: We offer high quality of tapered button bits & tapered drilling equipments, these tapered drilling button bits are made with high quality of raw material through special heat treatment, various type suitable for afferent work site. The diameter of tapered bits is from 28mm to 43mm with 4 6 7 11 12 taper...

Brand Name:OED/OEM

Model Number:34mm

Place of Origin:China

...marble quarry etc. for drilling Machine:YT26 Customized drill bit is also available, please send us inquiry with requirement, then we'll recommend the suitable carbide drill bit and material for you. Our Small drill Bits: 1.Diameter from 24mm to 48mm 2

Brand Name:MIROC

Model Number:7 Degree Taper Button Bit

Place of Origin:Shandong, China

...Taper button bit, as a small hole bit, use taper match bit with rod to be used for air leg or hand held jack hammer driller in quarrying and mining. Specifications 7° Tapered Button Bit Bit Dia. Buttons and Size (mm) Flushing Hole Weight Product Code mm inch Front Gauge Front Side kg Button Bit...

Brand Name:QIDELI

Model Number:H22/H25

Place of Origin:PUTIAN FUJIAN CHINA

...buttons taper drill bits cold pressing and hot set type button bits PRODUCT INTRODUCTION Tapered Button Bits is suitable for mining,quarring,tunneling and so on. It is widely used for gound quarring and underground drilling. 1. Our button bits is made with supper quality carbide and aloy steel. 2. After our mature heat treatment process, the performance of the product has reached the best state.Our bits...

Place of Origin:China

Brand Name:EST

Model Number:all types

...buttons hot pressed on bits bodies, Tapered Button Bits have a very good drilling performance and long life time. Different diameters and taper degrees are available to suit different applications in mining, quarrying etc. We can supply long skirt and short skirt Tapered Button Bits. Comparing with tapered chisel bits and tapered cross bits, button bits...

Brand Name:SUVEC

Model Number:tapered button bits

Place of Origin:China

...Tapered Drill Bit 7 Buttons 38mm 36mm 34mm Taper Button Bits Tapered drill bits are widely used in mining and quarrying, with the advantages of higher driving efficiency, long service life, better powder exhausting and easier bit back, which combine well anti-wear and anti-impact carbide butttons and high-performance steel together. Our Tapered drill bits...

Brand Name:HZJX

Model Number:32 mm 34 mm 36 mm 38 mm 41 mm

Place of Origin:China

... drill bits with a wide selection of head diameters from 26mm to 48mm . With carbide buttons hot pressed on the bit skirts , tapered button bits have a good drilling performance and are excellent in longevity . We manufacture various tapered button bits in

Brand Name:JCDRILL

Model Number:36mm

Place of Origin:China

... bit as long hole bit to use taper match with jack hammer bit with rod to be used for air leg or hand held jack hammer driller in quarrying, and mining. Tapered Quarry Button Rock Drill Bits 40mm 41mm 45mm With higher strength of tungsten carbide as the

Brand Name:New Diamond

Model Number:T45

Place of Origin:Hunan, China (Mainland)

...tapered chisel bits and tapered cross bits, button bits has higher technology, much longer primary drilling time and higher drilling efficiency. According to the tungsten carbide insert, tapered button bits can be divided into the types of hemispherical, conical andparabolic button, etc. Thread button drill bits...

Brand Name:Kinglong drilling

Model Number:Tapered Button Bits

Place of Origin:China

...Tapered Button Bits Head Diameters:From 28mm to 45mm. B: Tapered Chisel Bits Head Diameters: From 26mm to 43mm. C: Taper Degree Connection: 6°, 7°, 11°, 12°. D: Tapered Cross Button Bits Head Diameters: From 28mm to 65mm. E: Matched Hex Rods Size: Hex22-108mm Drill Rods, Hex25-159mm Drill Rods. Product Name: 30-40mm 7 degree taper rock drill bit Types Tapered chisel bits, Tapered cross bits, Tapered button bits Application:: Tapered drill bits

Brand Name:Super Diamond

Model Number:T38

Place of Origin:China

...Button Bit ISO Approved For Geotechnical Borehole Drilling Product Name: rock drilling button bits Description: rock drilling button bits Button bit made with high quality of best quality alloy steel bar and tungsten carbide, through heat treatment like Atlas. Material: Alloy steel bar and tungsten carbide bit...

Place of Origin:China

Brand Name:SANSUNG

Model Number:Taper Button Bit

... primary drilling time and higher drilling efficiency, so that the button bit is popular among the users. Our taper button bit is made of high quality raw material through special heat treatment, which ensures the high drilling performance. At present,