servo motor load testing system

Brand Name:KingPo

Model Number:CMT-1030SM

Place of Origin:China

...Servo motor loading test system Model Number: CMT-1030SM Product introduction: CMT-1030SM servo motor loading test system mainly uses hysteresis dynamometer to detect servo motor and stepper motor T-N curve and maximum stall point. The speed of the motor is controlled by the motor driver, and the locked-rotor torque is measured at different speeds of the motor through hysteresis dynamometer loading, and the PN curve is plotted. The load

Brand Name:Haida

Model Number:HD-B611

Place of Origin:China

... Sensor Tensile Apparatus is applicable to testing tensile stress, compressive stress, shearing force, peeling force, and elongation of materials, components, and finished product for metal, plastic, ...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:TT-1052DB

...Servo Motor Strollers Testing Machine / Dynamic Bicycle Testing Equipment Product description: EN14764 Servo Motor Dynamic Bicycle Testing Machine is suitable to test bike’s run test& brakes performance test. The tester is formed by two rollers with varied diameter and follows specification to install jump plates at bike’s seat post. pedals, bars, luggage carries, with load...

Brand Name:Infinity Machine

Model Number:RS-8116-6A

Place of Origin:Made in China

... conductor, flat cable and signal line, etc. The test method is as follows: Firstly, clamp one end of the wire rod and fasten it to the rotation clamp. Then have it make a horizontal rotation with hanging load to evaluate whether wire rod conduction is

Brand Name:Zhongli

Model Number:ZL-8004A

Place of Origin:China

..., It can be tested on the operated table, Using the electronic control systems, load sensor is rising and falling to test the tension or compression through the motor rotation, transmission machinery and T-screws. This machine is simple to operate,

Brand Name:Gaoxin

Model Number:GX-8002

Place of Origin:China

... Usage: Tensile test, flexing test, tearing test and so on. Standards: Most internation standards including ISO, ASTM and so on. Application: Leather Materials 2. Technical Parameter(accept customization) Model GX-8002 Max load 2kN (option, can customize)

Brand Name:KEJIAN

Model Number:KJ-1065C

Place of Origin:Dongguan,China

...load resolution of 1/25000, which ensures that accurate and precise measurements are obtained during testing. This is made possible by the use of a high-quality Panasonic servo motor that provides smooth and consistent loading and unloading of the test specimen. The UTM is also designed to be highly reliable, with an accuracy of +/-0.5%, ensuring that test...

Brand Name:Ledrobit

Place of Origin:China

*, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-font-smoothing: antialiased;}img, picture, video, canvas, svg {display: block;max-width: 100%;}input, button, textarea, select {font: ...

Brand Name:PTE

Model Number:Computer Controlled Servo Motor Tensile Testing Machine Universal Materials Flexing Tearing Tensile Strength Tester

Place of Origin:China

...Servo Motor Tensile Testing Machine Universal Materials Flexing Tearing Tensile Strength Tester Applications: It is suitable for wide range of material for tension, compression, bending, shearing and low cycle test. With special grips, it can also do very special test as customer’s request. It is for metal, rubber, plastic, spring, textile, and components testing. This machine is servo...

Brand Name:AIP

Model Number:AIP99XXX

Place of Origin:China

... Test: AC Hipot, insulation resistance and load Technical parameters AC Hipot: apply AC high voltage between the Vm, GND, Vcc, Vsp, FG and the casing, and check the current value of the test loop Output voltage setting range/precision AC 200～3000V ±(3%

Brand Name:SeeLong

Model Number:SLM-1000-xx

Place of Origin:China Luoyang

Motor Loading Test Bench and Laboratory Equipment Introduction The container engine test bench is to install all systems (dynamometer, engine measurement, and control system, installation platform, engine, engine auxiliary system, etc.) in the container, with the gate reserved at both ends, The inner partition is divided into the test room and testing...

Brand Name:PERFECT

Model Number:PT-6088B

Place of Origin:Dongguan , Guangdong, China

3 inch core Servo Motor Touch Screen High Speed Unwind Tester; Adhesive Testing Equipment​ PT-6088B High Speed Unwind Tester.pdf Usage: With high speed to peel off entire roll adhesive tape, to observed strength change and analysis size of peel force dur...

Brand Name:HongCe

Model Number:HC9914B

Place of Origin:China

IEC 60884 Switch And Plug-Socket PLC Control 2 Stations Endurance Test Equipment Production information The test machine is designed and manufactured according to IEC60884-1clause 20 and 21 fig 16, IEC60669-1 and etc. It is applicable for the switches ...

Brand Name:YUYANG

Model Number:YY1405

Place of Origin:China

Simulate Transportation Free Drop ISTA Packaging Testing Equipment Products introduction: Simulate Transportation Free Drop ISTA Packaging Testing Equipment is used to test the damage degree when the package is dropped, and test the impact resistance of ...

Brand Name:Lixian

Model Number:HZ-1009E

Place of Origin:China

Universal Testing Machine-300KN Metal Universal Strength Testing Machine Metal Universal Strength Testing Machine HZ-1009E mainly applied to test the metallic and non-metallic materials in tension, compression, bending, shear, peel,tear or two-points ...

Brand Name:SHC

Model Number:SC-AD4143

Place of Origin:China

Appearance Change Of Lanterns Light Testing Equipment Adjusting Device IEC60598 Information: The test equipment is designed and manufactured according to 4.14.3 of IEC 60598-1, mainly used for the lamps adjustment devices’ torsion, and bending test of the ...

Brand Name:Yaskawa

Model Number:USAGED-05AS2K

Place of Origin:Japan

..., Shaft - Straight with keyway and end tap, Totally enclosed, Self cooled Type. we dynamically test repaired units in our custom-built test stands where the product is paired with the matching components for real-world load performance verification. If

Brand Name:DAXIAN

Model Number:DX8327A

Place of Origin:China

...Testing Machine for Plastic Products Max. load 500 - 5000kg Unit exchange kg,N, LB Accuracy of load ± 0.5% of indicated value Load resolution 1/10,000 Max. tensile space 1100mm (mot including fixture) Valid test width 400mm Test speed 0.5-500mm/min keyboard input to control Speed control system Knob Data sampling 80r/s Motor Servo motor...