IEC60884-1 0-250mm Balance Arm 2.5N Plug Socket Tester Torque Test Device
|
... requirements' clause 14.23.2 Standard description with Plug Socket Tester: The plug socket tester torque test device is inserted into a fixed socket-outlet complying with this standard, the socket-outlet is pivoted about a horizontal axis through the...
Guangzhou HongCe Equipment Co., Ltd.
|
Suspended Luminaire Torque Test Device IEC60598-1 Clause 4.14.1 Test B PLC
|
...14.1 (test B), the test device is applied to assess whether the mechanical suspended device of rigid suspension luminaire has sufficient safety factor under the effect of constant torque force. The torque time and torque angle can be display at real time,...
Pego Electronics (Yi Chun) Company Limited
|
0.5N 1N 1.25N 2.5N Plug Torque Test Device SUS304 Stainless Steel
|
... the requirements of IEC60598-1, Chapter 4.14.6, Figure 11 of GB8898-2011, Figure 11 of IEC60065, IEC60335, IEC60884 and other standards. It is suitable for testing the torque exerted on the output socket by the device which is to be inserted into the...
SKYLINE INSTRUMENTS CO.,LTD
|
UL2594 Cable Tension And Torque Test Device For Vehicle Plug And Socket
|
...Torque Test Device for Vehicle Plug and Socket Complied Standards & Clauses Conforms to UL2594 clause 55.4, IEC62196-1:2014 clause 25.3 and figure 17 and table 11, IEC60309-1:2012 clause 23.3, etc. Product Overview It is used to test the ability of charging vehicle plug and socket, and connection cable accessories to withstand specified pulling force and torque......
Sinuo Testing Equipment Co. , Limited
|
IEC 60670-1 Mounting Box Tension And Torque Test Device For Enclosures Classified Testing
|
...Torque Test Device For Enclosures Classified Testing Product information: Standard: The device is designed and manufactured according to the standard requirements of IEC60670-1 Clause 12.12, figure 15. Sample: Concealed and semi-concealed mounting boxes and enclosures classified according to IEC60670-1 Section 7.2.2.1. Test......
Sinuo Testing Equipment Co. , Limited
|
IEC60065 Figure 11 Plug Socket Outlet Torque Test Device For UL / Australia Plug And All - Purpose Plug
|
... which occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets....
KingPo Technology Development Limited
|
Connection Plug Torque Test Apparatus for Devices forming a part of the MAINS Plug
|
... measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of the test apparatus pivots......
HK LEE HING INDUSTRY CO., LIMITED
|
0-50N.M opening torque test meter instrument device for bottle cap
|
...designed to test the opening and closing torque of various caps. It is mainly used to test the opening and closing torque and correction tightening force of various caps, lamp holders, etc., and the torsional destructive test of parts. The instrument has a...
Shanghai Glomro Industrial Co., Ltd.
|
Dynamic Torque Sensor 5-500N.M Torque Sensor For Robot Arm
|
... Parameters Values Capacity 0.1,0.2,0.3,0.5,1,2,3,5,10,20,30,50,100,200,300,500N.m Rated output 1~1.5mV/V Zero Balance ±0.01mV/V Creep(30min) ≤0.1%F.S. Non-linearity ≤0.2%F.S. Hysteresis ≤0.2%F.S. Repeatability ≤0.1%F.S....
Fibos Measurement Technology (Changzhou) Co., Ltd.
|
Electrical Power Cords Pull Test Machine , Torque Testing Machine IEC60320
|
...Torque Testing Machine Product Description: This instrument is based on the GB2099.1, GB4706 and IEC60320 standards, used to test the tensile and torsion tests of various types of electrical power cords, and to assess whether the power cord clamping device is firm. Instrument parameters: 1) Station: 1 2) Pull value: 30N, 60N, 100N 3) Torque value: 0.1, 0.25, 0.35N.m 4) Rally time: 1S 5) Torque...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|