Low Noise Cable Bending Testing Machine With Panasonic Servo Motor Bending Test
|
... conductor, flat cable and signal line, etc. The test method is as follows: Firstly, clamp one end of the wire rod and fasten it to the rotation clamp. Then have it make a horizontal rotation with hanging load to evaluate whether ......
Infinity Machine International Inc.
|
Appendix F Of TÜV Rheinland 2Pfg 2577/08.16 Robot Cable Bending Testing Machine
|
... system" Specimen and limitations: Industrial robot cables. Test purpose: Used to test the bending resistance of the power cord of industrial robot cables when entering the joint. Test principle: Using PLC control and servo motor drive, the bending test of...
Sinuo Testing Equipment Co. , Limited
|
10-60 Times/Min Cable Flex Tester , 6 Station Cable Bending Testing Machine
|
...Cable Flex Test Equipment 6 Station 10~60 Times/Min Description: UL817 IEC60335 cable bending testing machine can test six cables or cord sfitted with plugs simultaneously. This improves testing capacity.IEC60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test......
DONGGUAN YUYANG INSTRUMENT CO.,LTD
|
3.3kV Kema Pvc Insulated Cables for Mining Machines
|
Quick Details Type: Copper Conductor Warranty: 1 Year Place of Origin: Shanghai China Brand Name: SHANCABLE Operational temperature:0°C to +65 °C Sheathed material: PVC Product Description Product number specification Nominal thickness Cable outside ......
Shanghai Shenghua Cable (Group) Co., Ltd.
|
IEC 60794-1-21-2015 Cable Bending Test Machine 90° Bending Durabity Optical Fiber Tester
|
Machine Introduction This equipment is suitable for testing the ability of optical cable to withstand repeated bending, by applying repeated bending force, for qualified optical cable requires that the optical fiber is not broken, the attenuation change of the optical fiber does not exceed the value specified in the optical cable product standard, and the optical cable sheath does not crack. Test......
SKYLINE INSTRUMENTS CO.,LTD
|
Wire And Cable Two Three Wheel Bending Testing Machine For Measuring Mechanical Strength Of PVC Insulated Cables
|
DX8393 Wire and Cable Two Three Wheel Bending Testing Machine 1, Applicable scope: Mainly suitable for measuring the mechanical strength of PVC insulated cables or rubber insulated and extra flexible wires with a rated voltage of 450/750V or below, and ......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
2-24 Core PVC Insulated Cable IEC 60 332.1 RVVP Multi Stranded Copper Wire
|
... voltage: 2000V, 5min. Insulation resistance: >20M ohm×KM. Operating temperature (fixed installation): -30~ +70℃. Operating temperature (mobile installation): -5~ +70℃. Bending radius: 15× outer diameter of cable. Rated voltage: 300V/500V Conductor:...
Nuoxing Cable Co., Ltd
|
Low Voltage PVC Insulated Cable Copper Swa Armoured Underground Cable 3 Core
|
... ( duration max. 5 s):250 °C Minimum installation temperature:should not be lower than 0°C Max. conductor permissible tensile stress :50 N/mm² Minimum bending radius :15 x cable Ø Sample: Give us your...
Henan Interbath Cable Co.,Ltd
|
Two Groups Low Temperature Bending Test Machine for Cable and Wires
|
... Core which can not make Dumbbell test specimen(Shorter axis of sheath≦20mm flat cable). Reference standards ● GB2951.14-2008, Sect 8.1&8.2 Common test methods for insulating and sheathing materials of electric and optical cables - Part 14: Methods for...
Advanced Instruments Co.,Limited
|
Wire Core Circular Insulation Cable Testing Equipment Cold Bend Test Machine
|
... test of the circular insulation wire core whose diameter is small and the sector-shaped insulation wire core which can not be used for dumbbell. The apparatus shall be held in a refrigerator before and during the test. The diameter of the mandrel shall be...
KingPo Technology Development Limited
|
Submit your “pvc insulated cables bending testing machine” inquiry in a minute :