Home > Tools & Hardware > Hand Tools > Other Hand Tools >

Iec 62196 1 Pull Force And Torque Tester

1-10 Results for

iec 62196 1 pull force and torque tester

from 6 Products

IEC 62196-1 Clause 25.3 Cord Anchorage Pull Force And Torque Tester For EV Plugs And Vehicle Connectors

... and torque tester is designed according to IEC62196-1 clause 25.3 figure 17 and IEC60309-1 clause 23.3, It is used to test tension and torque on the electric vehicle plug and vehicle connectors provided with a flexible cable, it shall not be possible to...

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

IEC 60335-1 Clause 25.15 Cord Anchorage Pull Force And Torque Tester PLC Control

... of IEC60884-1 clause 23.2, IEC60745-1:2006, IEC60335-1 clause 25.15, IEC60598-1 clause 5.2.10.3, IEC60065 clause 16.5 and etc. The tester is used to conduct two tests of tension and torque at the terminals of appliances (lamps)...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

IEC62196-1 Pull Force And Torque Test Apparatus For EV Plugs And Connectors Cable Anchorage

...: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque. It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and...

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

IEC 62196 EV Connector Testing Equipment Plugs And Sockets Cable Pull And Torque 100mm

... clause 23.3, etc. Technical Parameters Operation Method Button operation Drive Mode Motor and cylinder Pull Force Weights 50N*1, 60N*1, 110N*1, 40N*2,110N*1 Can achieve 160N, 200N, 240N, 250N,500N Torque Weights 6N*1, 7N*1, 12N*1, 15N*1, 23N*1, 110N*1 Can...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

0.1Nm Plug Socket Tester

... connected cables is special designed and manufactured as per IEC 60947-5-2: 2007 Annex C.8. It is used to test the structural strength performance of various proximity switches and photoelectric sensors with integral connecting ......

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

Submit your “iec 62196 1 pull force and torque tester” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Guangzhou HongCe Equipment Co., Ltd. Products: 0.1Nm Plug Socket Tester
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “iec 62196 1 pull force and torque tester” inquiry

*From:
Your email address is incorrect!
To: Pego Electronics (Yi Chun) Company Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0