Home > Tools & Hardware > Welding & Soldering Supplies > Welding Rods >

Iec 60335 2 30 Test Rod

1-10 Results for

iec 60335 2 30 test rod

from 9 Products

EN 60335-2-30 60mm Test Rod IEC 60335-2-30 Clause 11 75mm With Hemispherical End

EN 60335-2-30 60mm 60mm Test Rod: Probe diameter:60mm Probe length: 80mm Material: stainless steel Hollow with wall thickness of 5 – 10 mm IEC 60335-2-30 Clause 11 75mm Test Rod Probe diameter:75mm Probe length: 80mm Baffle plate diameter:95mm Baffle ......

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

IEC 60335-2-30 Clause 11.8 Test Rod For Test Accessibility Of Live Parts In Electrical

IEC 60335-2-30 Clause 11.8 Test Rod For Test Accessibility Of Live Parts In Electrical Product Information: Standard:IEC 60335-2-30 clause 11.8. Test sample:Heaters. Feature:The test rod is 75 mm in diameter, of unrestricted length and with a hemispherical......

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

Length 100mm Rod Test Finger Probe With Nylon Handle IEC 60335-2-16

Test Rod With Nylon Handle 100mm Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of the reset button of a protective device. Appliance is checked by applying a rod in any direction to touch the protective device which is in off state. The diameter of rod is 76 mm ±0.1mm and it has a flat end. There shall be a distance of at least 1.5mm between the rod...

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

Resistance To Heat And Fire Standards Test For Household Appliances: GB 4706.1-2005 30/IEC 60335-1

... and similar electrical appliances - safety - Part 1:general requirements GB 4706.1-2005 30 2024-04-03 Household and similar electrical appliances - safety - Part 1:general requirements IEC 60335-1:2010+A1: 2013+A2: 2016 30 2024-04-03 21 Resistance to...

Shenzhen LCS Compliance Testing Laboratory Ltd.

Address: 101, 201 Building A and 301 Building C, Juji Industrial Park, Yabianxueziwei Shajing Street, Baoan District, Shenzhen, 518000, China

Ф10mm Handle Test Rod For Testing Concealment Of The Reset Button

...Test Rod For Testing Concealment Of The Reset Button IEC 60335-2-16 Clause 22.102 Test Rod For Testing Concealment Of The Reset Button Of A Protective Device. Product information: The test probe is designed and manufactured according to the IEC 60335-2-16 clause 22.102. It is used to test concealment of the reset button of a protective device. Appliance is checked by applying a rod......

Dongguan Kingpo Technology Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

8,0 mm Test Rod of IEC60335-2-14

IEC60335-2-14 8mm Test Rod Technical parameters: Diameter of the probe: 8 mm Probe materials: Stainless steel Handle: Nylon 20.102 Blades of hand-held blenders shall be completely screened from above and shall not be able to touch a flat surface while ......

HK LEE HING INDUSTRY CO., LIMITED

Address: 7F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

Stainless Steel IEC 60335 Test Finger Probe 18 Ф8.6

IEC 61032 Figure 12 Test Probe 18 Small Finger Probe Ф8.6 This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children......

Guangzhou Shice Equipment Co., Ltd.

Address: #1,chencongxi10xiang,chencongcun,qiaonanjiedao,panyu,Guangzhou

8mm Cylindrical Rod Test Probe For Blender As Per IEC 60335-2-14 Clause 20.102

Φ8mm Cylindrical Rod Test Probe for Blender as Per IEC60335-2-14 clause 20.102 1. Introduction The Φ8mm cylindrical rod test probe is designed to meet the test requirements of IEC60335-2-14 clause 20.102 and GB4706 clause 20.102, it is applied to check if ......

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

Submit your “iec 60335 2 30 test rod” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Pego Electronics (Yi Chun) Company Limited Products: 8mm Cylindrical Rod Test Probe For Blender As Per IEC 60335-2-14 Clause 20.102
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “iec 60335 2 30 test rod” inquiry

*From:
Your email address is incorrect!
To: KingPo Technology Development Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0