DN80 Flange Connection CF8M Lifting Type Check Valve
|
...single direction. The main purpose of check valves is to prevent the flow in reverse direction which would othervise cause the system or equipment to damage, partially or completely,causing a major setback. Check valves are applicable in systems such as...
Wenzhou Xidelong Valve Co. LTD
|
Ductile Iron GGG40 DN25 DN80 Thread Ball Check Valve
|
...DN80 Ductile Iron Thread Ball Check Valve 1. Property Specifications: Working pressure:1.6Mpa Pressure closuretest pressure: 1.76Mpa Shell pressure test pressure: 2.4Mpa Working temperature: NBR: 0℃ - +80℃ EPDM: -10℃ - +120℃ 2. Material: NO. Part Material 1 Body GGG40/GG25 2 Gasket NBR/EPDM 3 Cap GGG40 4 Ball NBR/EPDM 5 Bolt A2-70 6 Screw nut A2-70 3. Dimension: DN DN25 DN32 DN0 DN50 DN65 DN80......
ANHUI SIFA VALVE.CO., LTD.
|
Blue Swing Type Check Valve , DIN Cast Iron Lift Check Valve Check Structure
|
... plate, valve stem and spring and other important parts, and the use of thin lightweight design.Because the closing stroke of the valve plate is shortened and the spring action can accelerate the closing effect, water hammer and water hammer sound can be...
SHANGHAI HAIJI IMPORT&EXPORT CO.,LTD
|
Ball Type Check Valve Dn200 Ss316 Pn16 Flanged End Check Valve
|
...ough a system opens the valve, while any reversal of flow will close the valve. Exact operation will vary depending on the type of Check valve mechanism. Most common types of Check valves are swing, lift (piston and ball), butterfly, stop and tilting-disk....
TOBO STEEL GROUP CHINA
|
Fluid Non Return 10Bar SS304 Clamp Type Check Valve
|
...type check valve / Spring check valve Sanitary check valves are specifically used for the food handling and processing industries to prevent backflow of product. Commonly used with liquid products, spring check valves are designed to assist closure pressure to create a positive shutoff Specification Product Name: SS304 Clamp type check valve / Spring check valve Valve......
DONJOY TECHNOLOGY CO., LTD
|
Ball Check Valve Forged Steel Check Valve Carbon Steel A105N 1 1/2" SW Dn40 800lb Lift Type Check Valve Piston Type
|
...tem. These valves are activated by the flowing material in the pipeline. Forged Steel Ball Check Valve VERVO forged steel Ball disc check valves are offered in lift type, bolted bonnet and welded bonnet design in a wide range of carbon, stainless steel,...
ZHEJIANG VERVO VALVE CO.,LTD
|
API 602 Lift Type Check Valve , Forged Steel Check Valve High Rigid
|
... check valve and available in with two type configurations, i.e., Plug type and Ball type. These valves shall be bolted bonnet or welded bonnet type with full or standard bore options. These valves are non-return valves, which allows flow in one direction....
Zhejiang JieYu Valve Co., Ltd.
|
6 Inch Swing Type Check Valve / Wafer Flapper Check Valve DN15 ~DN1200
|
...Type Check Valve / Wafer Flapper Check Valve DN15 ~DN1200 Swing Type Check Valve Application: The Check valve is used for preventing the back-going of medium in pipelines and equipments, and the pressure of medium will bring the result of opening and closing automatically. When the medium is back-going, valve disc will automaticaly closed to avoid accidents. Swing Type Check Valve......
Shanghai kangquan Valve Co. Ltd.
|
Wafer Type Check Valve Ductile Iron Body＆Disc
|
...Type Check Valve 1. PRODUCT PROFILE Wafer type dual plate check valve is one type of non-return valve with two torsion springs added to each of pair valve plates, which close the plates quickly and automatically, preventing the mediums from flowing back. Wafer dual plate check valve can be mounted between the two pipes in both horizontal and vertical directions. The wafer type check valves are wafer-type valves......
Anhui Prosper Flow Technology Co., Ltd
|
DIN3202 F6 cast iron ball type check valve factory
|
...type check valve factory The function of cast iron ball type check valves is to ensure that there will be no reverse flow in the pipeline. Specifications Ball type Check Valve range: 1.Production Size:1 1/2”-20” DN40-DN500mm 2.Pressure range:PN10,PN16,125LB,150LB Ball type check valve Standard: 1.Face to Face:DIN 3202 F6 2.Flange Standard: EN1092-2/BS4504 PN16,ASME B16.1 3.Testing Standard:EN12266 Ball type check valve...
HEBEI PAWOFUOU VALVE AND PIPE FITTING TECHNOLOGY CO.,LTD.
|
Submit your “dn80 y type check valve” inquiry in a minute :