IEC60884-1 0-250mm Balance Arm 2.5N Plug Socket Tester Torque Test Device
|
... requirements' clause 14.23.2 Standard description with Plug Socket Tester: The plug socket tester torque test device is inserted into a fixed socket-outlet complying with this standard, the socket-outlet is pivoted about a horizontal axis through the...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60884 Plug Socket Tester Torque Balance Test Apparatus
|
...Socket Outlet Torque Balance Test Apparatus Technical parameters: weight 2.5N*1, 1N*1 Plug UL plug*1, European plug*1,all-purpose plug*1 Conforms to standard IEC60884,VDE0620,IEC60598,IEC60065Fig11 Arm of force 0-200mm The distance from the contact surface and the Axis of the surface 8mm Product information: The plug torque tester......
Guangzhou Shice Equipment Co., Ltd.
|
IEC60065 Plug Socket Tester , Direct Plug In Equipment 0-200 Mm Force Arm
|
Plug Torque Test Device (plug-in Test Apparatus) 1. Introduction Plug torque test device is designed according to IEC60065 figure 11, it is applied to check the socket outlet mechanical strength of direct plug-in equipment. 2. Specification ● Distance bet......
Pego Electronics (Yi Chun) Company Limited
|
Torque Balance Plug Socket Tester SOB-1 IEC 60884 0-200mm Force Arm
|
Socket-outlet Torque Balance SOB-1 Product information: The HT plug torque tester conforms to the standard of IEC60065 figure 11. It is used for checking whether the mechanical stress which occurs when the Direct Plug-in Equipment with plug pin normally ......
shanghai kerang technology co ltd
|
KingPo IT Test Equipment Socket Outlet Torque Balance Tester KP-LJ2
|
... apparatus as shown in IEC60065 Figure 11. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. The balancing arm of the test apparatus pivots about a horizontal axis through...
KingPo Technology Development Limited
|
Submit your “2 5n balance arm plug socket tester” inquiry in a minute :