plc pull force and torque tester

Brand Name:Sinuo

Model Number:SN1113L

Place of Origin:China

... of IEC60884-1 clause 23.2, IEC60745-1:2006, IEC60335-1 clause 25.15, IEC60598-1 clause 5.2.10.3, IEC60065 clause 16.5 and etc. The tester is used to conduct two tests of tension and torque at the terminals of appliances (lamps)

Brand Name:PEGO GROUP

Model Number:PG-PCT2

Place of Origin:China

... and torque tester is designed according to IEC62196-1 clause 25.3 figure 17 and IEC60309-1 clause 23.3, It is used to test tension and torque on the electric vehicle plug and vehicle connectors provided with a flexible cable, it shall not be possible to

Brand Name:kingpo

Model Number:KP-CG97

Place of Origin:china

IEC 62196-1 Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus​ Product Information For Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus​: This pull force and torque test equipment is used to ...

Brand Name:Sinuo

Model Number:SNQC1007B

Place of Origin:China

... 110, Figure 111 and Table 114. Product overview The equipment adopts PLC control and motor drive. The weights apply stable pulling force, and torque is generated through the combination of weights and a torque arm. The system allows setting the number of

Brand Name:Infinity Machine

Model Number:IN-I5150

Place of Origin:Made in China

Connectors Inserting & Extracting Testing Machine for Connector Push Pull Force Testing Purpose: Insertion force testing machine apply for the inserting and extracting test of all kinds of connectors. Equip with automatic center system and special ...

Brand Name:HongCe

Model Number:PST - 1

Place of Origin:China

...Torque And Twist Tester Electrical Appliance Tester Product information: The test appliance conforms to IEC60335-1:25.15. It is used to check whether the cord anchorage of the household appliances’ power cord is firm, can process the pull force and torque testing. Parameters: Power Supply AC230V, 50HZ Pull force weights 20N*2,30N*2( the pulling force of 30N,60N,80N,100N can be achieved) Torque...

Brand Name:HAIDA

Model Number:HD-F743

Place of Origin:Guangdong, China (Mainland)

PLC Control Chair Strength Tester Touch Screen Interface DESCRIPTION The machine is designed to test office chair arm ( vertical and horizonal test ) and back strength. It with PLC controller, touch screen interface to input test parameters, test force and times can be set. STANDARD FEATURES Capacity 0-200kg Setting time 0-99S ( adjustable) PLC control LCD touch screen interface Motor One servo motor & air cylinder to provide pull force...

Brand Name:HJ

Model Number:HJ0609

Place of Origin:China

Cord Anchorage For Supply Cord Household Appliance Test Equipment Standard: IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ clause 25.15 Application: It is used to check whether the cord anchorage of the ...

Brand Name:SKYLINE

Model Number:SL-BC002

Place of Origin:CHINA

...Tester Applications: Children Bicycle Handlebar Component Tester is suitable for children bicycle handlebar component test. Available to test for: handle stem torque test, handle stem dead load test, handle bar and handle stem torque test. Test force value 500N Loading Time 0-999s can be set Stroke 250mm Controller PLC...

Brand Name:KERANG

Model Number:YY0059-QX

Place of Origin:China

..., downlink, time, calibration. The keyboard controls the menu on the LCD screen to display the pulling force and rotating torque, and automatically outputs the data report and prints the test data on board. It is completely in accordance with yy0059. (1

Brand Name:JINYU

Model Number:JY609

Place of Origin:CHINA

... lines . 7 Vacuum testers . 8 Push-pull force meters . 6 Precision Electronics Balance . 5 Torque meters . 3 Height gauges . 3 Pump life testers 11 Printing machines Our ability and advantages: Good Quality All products are guided and monitored under

Place of Origin:China

Brand Name:Wellmedlab

Model Number:ZD1962-T

...Tester Safety Testing Medical Equipment and Technology for medical device manufacturers and governmental quality department Specification: The tester is based on PLC controls and adopts a 5.7 inch color touch screen to show menus, operators can use touch keys to choose nomical capacity of syringe or nominal outside diameter of needle as per product specification . Axial force , torque