plastics products melt flow index tester

Brand Name:JINHAIHU

Model Number:XNR-400C

Place of Origin:BEIJING, CHINA

...,ASTM D1238. It's suitable to measure melt flow character of PP, PE, POM, ABS plastics and plastic productions, widely used in factories, products quality testing station, scientific and research institutes, and concerned industries. Main Specification:

Brand Name:BAXIT

Model Number:GLO-MF46

Place of Origin:CHINA

Melt flow Rate Meter / Plastic Melt Meter / Plastic Particle Melt Index Tester Product Description Equipment Overview 1. The heating cylinder is made of Hastelloy to avoid oxidizing and rusting at the high temperature (up to 400-500 ℃) for a long time...

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:CHINA

...plastic/rubber melt flow index tester mfi testing machine Specifications Melt Flow testing machine 1.Melt Flow Indexer is used to determine melt-mass flow rate . 2.High quality,melt indexer 3.Direct factory 1.Melt Flow testing for PP and PE 1.Melt index tester is used to determine melt-mass flow rate (MFR). 2.High quality,melt indexer Electronic MFR Plastic Melt Flow Index Testing Instrument 2.Principle: Thermoplastic melt flow rate (melt

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R803-1

...Melt Flow Index Tester , Automatic Plastic Testing Equipment Product Description Melt Flow Index tester is used to determine melt-mass flow rate (MFR).melt-Volume flow rate (MVR) and melt density of thermoplastic resin.it is applicable not only to the higher melting temperature, such as polycarbonate, nylon, Fluoroplastics, poly oxide and other engineering plastics, and it also applies to plastic measurement of melt...

Brand Name:KEJIAN

Model Number:KJ-3092

Place of Origin:China

...Tester/ Plastic Melt Flow Index Tester Plastic Testing Machine​ Uses: KJ-3092 melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Product...

Brand Name:LIYI

Place of Origin:China

Model Number:LY-RR

..., polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Characteristics: 1. Fast heating speed, very small overshoot. 2.

Brand Name:GC

Model Number:GC-MI-DP

Place of Origin:China

... every 10 minutes when various plastics and gums pass through a certain temperature and load in a viscous flow state. It is suitable for melting high temperature polycarbonate, poly sulfoxide, fluorine plastics, nylon and other engineering plastics. Also,

Brand Name:Great Win

Model Number:GW-108

Place of Origin:China

...Melt Flow Index Tester Machine For Mask Melt Blown Materials Volume Testing Method(GW-108) Product introduction: It is used to measure the temperature and load of various plastics and resins in the state of viscous flow, and the melt flow rate MFR value of the standard die every 10 minutes. It is suitable for polycarbonate, polyarylsulfone, and fluorine with a high melting temperature. Engineering plastics such as plastics

Brand Name:YUYANG

Model Number:YY166

Place of Origin:China

... 2000,ASTM D1238. It's suitable to measure melt flow character of PP, PE, POM, ABS plastics and plastic productions, widely used in factories, products quality testing station, scientific and research institutes, and concerned industries. Specification:

Brand Name:ZL

Model Number:ZL-3013

Place of Origin:China

... the melt flow rate of thermoplastics (MFR; units: g/10min) instrument. For polyethylene, polypropylene, polyoxymethylene, ABS resin, polycarbonate, nylon, plastics and other polymers fluoride melt flow rate at high temperature determination. How it

Brand Name:DAXIAN

Model Number:DX 6001

Place of Origin:China

ISO 1133 High Precision Temperature Control Melt Flow Rate Testing Equipment Specifications: Measuring range 0.1-800 .00g/10min (MFR) 0.1-800.00 cm3/10min (MVR) Temperature range room temperature -450 ℃ Temperature accuracy ± 0.2 ℃ Timing accuracy 0.1S ...

Brand Name:AISRY

Model Number:ASR-5605

Place of Origin:China

High Quality Application Determination Of Melt Flow Rat Testing Machine Application: It can be used for the determination of melt flow rate and melt density of various plastics such as polyethylene,polypropylene,polystyrene,ABS resin,fiber resin,...

Brand Name:BonninTech

Model Number:XNR-400B/D

Place of Origin:Wuhan, China

...melt flow rate properties of thermoplastic (such as PE, PP, POM, ABS, PC, nylon and Fluor plastics, etc) under high temperature, according to test methods of GB/T3682, ISO1133, ASTM D1238 test standard. It is widely supplied to the production factory and

Brand Name:SKYLINE

Model Number:SL-PI08

Place of Origin:China

.... The melt flow indexer is suitable for measuring melt mass flow rate(MFR) and melt volume flow rate(MVR) of plastic materials such as polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate.

Brand Name:AI

Model Number:AIC41098

Place of Origin:China

Product description: Melting index apparatus/melt flow rate tester (touch screen) is used for determination of the melt mass-flow rate (MFR)/melt volume-flow rate (MVR) for thermoplastics like polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic...

Brand Name:POOTAB

Model Number:PT-8036H

Place of Origin:China

... of aromatic sulfone, fluorine plastic, nylon and other engineering plastics, can also be applied to polyethylene (PE),(PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in

Brand Name:TUWE

Model Number:TWC806

*, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-font-smoothing: antialiased;}p[style^="text-align"] img{display:inline-block}input, button, textarea, select {font: inherit;}p, h1, h2, ...

Brand Name:Delta

Model Number:MFR

Place of Origin:China

Melt Volume Flow Rate ASTM D1238 Melt Flow Rate Tester by Extrusion Plastometer Introduction: MFR ASTM D1238 Melt Flow Rate Tester is deisgned and manufactured according to ASTM D1238-98 and ISO1133; MFR ASTM D1238 Melt Flow Rate Tester is suitable for testing fluorine plastic, nylon and other engineering plastics...

Brand Name:KS

Model Number:TPUJ

Place of Origin:China

...a good melting point of 50-60°C and a melt flow index of 20-30. This powder has good adhesive properties and can be used in a wide variety of applications. It is also resistant to washing at temperatures up to 40°C. The PES hot melt adhesive powder is a