non destructive testing ect probe

Brand Name:GTJ

Model Number:GTJ-L800

Place of Origin:China

... the thickness of concrete or other non-ferromagnetic media; in use, the transmitting probe and the receiving probe are placed on the floor respectively. The two opposite test surfaces respectively transmit and receive electromagnetic signals, and the

Place of Origin:China

Brand Name:HUATEC

Model Number:TG4000

Non Destructive Testing Equipment Through Coating Ultrasonic Thickness Gauge TG 4000 with Velocity Range 1000 - 9999 m/s TECHNICAL DATA Display 128X64 Pixel LCD with backlight Measuring range (in two function modes of Standard mode and through coating mode) Standard mode 0.8 mm-- 300.0 mm in steel depending on the probe. Special request can reach measuring range up to 500mm Through coating mode 2.5 mm – 18.0 mm (Probe...

Brand Name:SINOWON

Model Number:TG-200

Place of Origin:DONGGUAN/CHINA

...Non Destructive Testing Machine Coating Thickness Tester with F and NF Measuring Probes Application Description: F Type Magnetic induction: ● Can measure the thickness of non-magnetic coating layers on magnetic substrate ● Such as: (aluminum, chrome, copper, enamel, rubber, paint) on magnetic substrate (steel, iron, alloy and magnetic stainless steel) NF Type Eddy Current: ● Can measure the thickness of non...

Brand Name:iqualitrol

Model Number:SRT-6210

...Non Destructive Portable Surface Roughness Tester with RS232 Model: SRT-6210 Technical Data Download: iqualitrol Surface Roughness Tester SRT-6210 When measuring the roughness of surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism inside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causes displacement of the probe

Brand Name:Gold

Model Number:ZBL-U5600

Place of Origin:Chongqing, China

... tubes or probes embedded in the concrete. One probe acts as a transmitter, while the other acts as a receiver. As the ultrasonic waves travel through the concrete, they are reflected back to the receiver by any discontinuities or changes in the concrete's

Brand Name:iqualitrol

Model Number:CM-1210-200N

Place of Origin:DONGGUAN

Coating Thickness Gauge CM-1210-200N for Non-Conductive Coatings on Non-magnetic Metals Brief Introduction: The F probes measure the thickness of non-magnetic materials on magnetic materials. The N probes measure the thickness of non-conductive coatings...

Brand Name:Btutest

Model Number:BTU-CWG

Place of Origin:Made in China

Crack Width Gauge Concrete Testing Equipment Features: Newly upgraded, with three proof shell design, waterproof, dustproof and shockproof; Imported sensor chip is adopted, with high test accuracy; The host screen is provided with scale marks, which is ...

Brand Name:Raytech

Model Number:RTG-510

Place of Origin:China

... IN STEEL DEPENDING OF THE PROBE special request can reach measuring range up to 500mm THROUGH COATING 2.5 mm – 18 mm ( DEPNDING OF THE PROBES ) TOLERANCE +/-0.05 mm IN STEEL DISPLAY RESOLUTION 0.01mm ( Less than 100.0 mm ) 0.1mm( over 100 mm ) BULIT-IN

Categories:Eddy Current Testing Equipment

Country/Region:china

Standard probe for eddy conductivity meter of TMD-105 Probes B type machine with diameter 14 mm working frequency of 60 KHz and diameter 8mm working frequency of 500 KHz of a probe; The probe is made of imported material, wear-resistant and high ...

Brand Name:SAMYON

Model Number:SY

Place of Origin:CN

Non-Destructive Testing Instrument For Rebar Location And Rebar Corrosion And Concrete Defect Testing Application After the building construction or bridges are finished, the testing unit will test the structure every year to check whether it has some defect inside and whether some potential influence by the concrete. So the testing units will do some general testing...

Brand Name:MITECH

Model Number:MDW-S

Place of Origin:China

...Testing Machine , Non Destructive Testing Equipment Product Overview Mitech MDW-S digital display series gate type electronic universal testing machine,through the single-chip automatic control motor driving screw movement, equipped with the corresponding auxiliary for metal, non-metallic and composite materials for pull, pressure, bending and other mechanical properties test.( The tensile test...

Brand Name:Zetron

Model Number:MFT-900

Place of Origin:China

... integrity leak detection solutions. compliance fDA 13287 standard: meet one of USP 1207 test methods: non-destructive testing method. FEATURES ・Comply with USP <1207>, ASTM F2338 standards and FDA standards. ・Semi-automatic detection, suitable for

Brand Name:UNICOMP

Model Number:UNC450-B

Place of Origin:China

... Unicomp UNC450 for cylinder,metal castings, aerospace parts non-destructive testing Product Description: The specialized equipment serves as a cornerstone for non-destructive testing across a vast array of materials and products. It is extensively ...

Place of Origin:XIAMEN,china

Brand Name:COBE

...testing + through type eddy current testing system System Introduction COBE persistent in development of innovative nondestructive testing instruments and applications to make your industrial production and industrial safety can be effectively controlled and achieve greater production efficiency and reduce testing costs.COBE's mission is through the provision of reliable non-destructive testing...

Brand Name:AE

Model Number:SUB100

Place of Origin:Guangdong

...non-destructive testing ultrasonic flaw detector Product description SUB100 series portable ultrasonic flaw detectors are mainly used for detecting, locating, evaluating and diagnosing various damages, and can perform non-destructive testing on all kinds of metal equipment or equipment. Key technical indicators Item Indicator Item Indicator Testing...

Brand Name:HUATEC

Model Number:H3543HWC-EG

Place of Origin:China

... For Various Fields Such As DR And Non-Destructive Testing H3543HWC-EG is a lightweight wireless detector based on amorphous silicon(a-Si), which is suitable for various fields such as DR and Non-destructive testing. Sensor Receptor Type a-Si Scintillator...

Place of Origin:Jiangsu, China

Brand Name:Chengxin

Model Number:14mm

Non Destructive Testing Accessories Lead Brick Radiation Proof Rectangular Brick Used For Manufacturing Shielding Wall Product Description Lead brick is mainly used for the construction of shielding walls in places or processes where the possibility of ...

Brand Name:Suzhou Desisen (DSS) Electronics

Model Number:ETP-2

Place of Origin:China

*, *::before, *::after {box-sizing: border-box; } * {margin: 0; } html, body {height: 100%; } body {line-height: 1.5; -webkit-font-smoothing: antialiased; } img, picture, video, canvas, svg {display: block; max-width: 100%; } input, button, textarea, ...

Brand Name:Haida

Model Number:HD-E812

Place of Origin:China

RoHS1.0 Analyzer Description: Element testing ranges from S-U, that is, Pb, Cd, Hg, Br in PBB and PBDE that can be controlled in the RoHS directive, Cr in hexavalent chromium, and Cl and Br in the halogen-free directive, which can fully meet RoHS/WEEE/...