mvr forced circulation crystallization system

Brand Name:GELING

Model Number:GL-FC-3

Place of Origin:Shanghai, China

... material liquid is added from the lower part of the circulating pipe, mixed with the crystal slurry leaving the bottom of the crystallization chamber, and sent to the heating chamber by the pump. The slurry is heated in the heating chamber (usually 2 ~

Brand Name:Jiadi

Place of Origin:Shanghai

Climbing film evaporator MVR forced circulation (type) evaporator Triple effect falling film evaporator 1. Items Description: The triple effect Evaporator makes the material in a low ...

Brand Name:Peony

Model Number:MVR

Place of Origin:China

Forced Circulation MVR Evaporation System For NaCl crystalization Introduction: Forced circulation evaporation crystallization system widely used, in the form of raw material liquid by the circulation pump with circular mother liquor to the heater for heating, and then enter the FC crystallizer, part of the crystal slurry discharge by the conical bottom of the mold, did not come in mother liquor by circular tube by circulating...

Brand Name:HANPU

Model Number:HP-MVR

Place of Origin:Jiangsu,China

... forced circulation evaporation system consists of evaporator, separator, forced circulation pump and steam compressor. The heat transfer between the material in the evaporator tube and the steam outside the tube causes the temperature to rise; After the

Place of Origin:Jiangsu, China

Brand Name:Stord

Product Description Multi effect falling film evaporator is monoprogrammed evaporation equipment, comprised of evaporator, separator, heat exchanger, pump, control system, and worktable. Various evaporators as rising film evaporator, natural circulation ...

Brand Name:DENOR

Model Number:DENOR-ZLB

Place of Origin:China

... on the rotational force of the impeller along the pump shaft to generate horizontal thrust. This type of pump is commonly used within chemical industries for the cycle evaporation of chemical ...