material flow rate analysis and evaluatio

Brand Name:JHH

Model Number:XNR-400C

Place of Origin:Beijing, China

... is a plastic extruder. It works under the specified temperature to melt the sample by using heating furnace. The melted sample flows out a specified hole under the given load. In plastic producing activities, we usually use the melting index to, under

Brand Name:KACISE

Model Number:KTG113-C

Place of Origin:CHINA

The KTG113-C oxygen analyzer is used for on-line analysis of oxygen content in building materials Introduction The KTG113-C oxygen analyzer is a high-precision on-line detection and analysis instrument for oxygen content in inert gases, developed by our ...

Brand Name:Wayeal

Model Number:IC6200

Place of Origin:Anhui, China

Technical Paramaters of Ion Chromatography Instrument Product Name IC6200 Ion Chromatography Instrument System Parameters Qualitative repeatability ≤0.5% Quantitative repeatability ≤1.0% Pump System Pump material PEEK Pump flow rate (0.001~10.000) mL/min ...

Brand Name:SKYLINE

Place of Origin:China

...rate of building materials. Standard: ISO5660-1:2002 Technical Parameters Power supply voltage AC220V AC 50Hz Maximum operating power ≥5KW Cone heater power ≤5KW Heat output heat 0~120KW/m2 The maximum placement of the sample box 100mm × 100mm × 50mm Exhaust flow rate 0.012m3/s~0.035 m3/s (adjustable) Timing value resolution 1s error <1s/n Oxygen analysis...

Brand Name:Baode

Model Number:BL6 series

Place of Origin:China

...Exchanger Product Description Analysis of heat transfer efficiency The heat transfer efficiency of plate heat exchangers depends on a number of factors, including plate material, flow path design, fluid properties, flow rate and temperature difference. The...

Brand Name:YIXING

Model Number:YX007

Place of Origin:ZHEJIANG, CHINA

OEM and ODM Acceptable Material Brass and copper element Material analysis Cu≥59% Water pressure testing 1.6MPA Air Pressure Testing 0.6MPA Water flow rate Bath/Shower Mixer18-45 L/min Cartridge Life time 300,000 times Open and Close,WRAS CERTIFICATE Body ...

Place of Origin:CHINA

Brand Name:OEM

...: For medical Certificate : ISO 9001/ISO 13485 / ISO 14001 / OHSAS 18001 Description In addition to factors such as tight tolerance, flow rates and wicking capabilities; cleanliness and aesthetics are of paramount importance. For medical device solutions,

Brand Name:ZL

Model Number:ZL-3048

Place of Origin:CHINA

... characteristics of the thermoplastic material, for the production and development of important scientific information and a detailed analysis report is to study the rheological properties of the polymer materials, the shear rate viscosity changes,