iec 60884 1 figure 8 plug socket tester

Brand Name:HongCe

Model Number:HC9919

Place of Origin:China

... requirement of IEC 60884-1 figure 21, which is used to process the bending test for the power cord of non rewirable plugs, appliances and similar electrical appliances (electric tools). The device can be preset test times (up to 999999), it can carry out

Brand Name:kingpo

Place of Origin:china

... for testing the firmness of the plug and the plug pin. The plug is placed on a rigid steel plate provided with holes suitable for the pins of the plug. The distance between the centers of the holes shall be the same as the distances between the centers of

Brand Name:Sinuo

Model Number:SN2121

Place of Origin:China

...figure 21 clause 23.4, which is used to process the flexing test for the flexible cable of non-rewirable plugs and non-rewirable portable socket-outlets. Equipment characteristics: The test times (up to 999999) can be preset on this test apparatus, and the

Brand Name:Pego Electronics

Model Number:PG-CPT

Place of Origin:China

IEC 60884-1 Figure 8 Plug and socket-Outlet Compression Test apparatus for Checking Mechanical Strength of Plug and Socket-Outlet 1. Introduction The compression test apparatus is designed to meet the test requirements of IEC60884-1 clause 24.5 for checking the mechanical strength of socket-outlets and plugs...

Place of Origin:China

Brand Name:KeRang

... for 10,000 flexing at a rate of 60 flexing per minute. Six cables or cords fitted with plugs can be tested simultaneously. The cables are connected to a socket and the tail of the cable is connected to the tester to detect if an internal fault occurs with

Brand Name:KingPo

Place of Origin:China

... Plug Socket Tester GOST 7396.1-89 IEC 83-75 Group C Socket Measure Product information: This testing device conforms to GOST 7396.1-89 (IEC 83-75), Group C figure 1 and figure 2. The gauge in figure 1 is used for verify the interchangeability of plugs,

Brand Name:SHC

Model Number:SC-LG05

Place of Origin:China

... is used for testing the firmness of the plug and the plug pin. The plug is placed on a rigid steel plate provided with holes suitable for the pins of the plug. The distance between the centers of the holes shall be the same as the distances between the

Brand Name:JLX

Model Number:LX-L1Y

Place of Origin:Made in China

...plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of the test apparatus pivots about a horizontal axis through the center lines of the contact tubes of the socket-outlet at a distance of 8 mm behind the engagement face of the socket...

Brand Name:Sinuo

Model Number:SNQC1014

Place of Origin:China

... and Similar Applications, and For Electric Vehicles" clause 26.3, fig 19. IEC60884-1:2006 "Plugs and socket-outlets for household and similar purposes- Part1:General requirements" clause 24.9 and figure 29. GB2099.1-2008 "Plugs and socket-outlets for