iec 60335 standard test finger

Brand Name:HongCe

Model Number:HT-I22

Place of Origin:China

IEC 60335-1 Test Finger Probe For Test Nails The maximum applied pressure is 30N Product description of Test Finger Probe: 1. The test nails are made according to GB4706.1-2005, IEC60335-1 and UL standards. 2. The test nail is mainly used to test whether ...

Place of Origin:China

Brand Name:Julixing

IEC 60529 Standard Test Finger Probe B with 10 ~ 30N Force Force Level: 10N, 20N, 30N 1. Conforms to: Standard IEC 61032-1997, IEC 60529-2001, GB/T4208-2008 and UL etc. 2. The Standard Test Knurled Finger Probe is the necessary appliance to prevent electric shock for household and similar electrical problem. Technical Parameters: Knurled Finger Diameter: 12mm Knurled Finger Length: 80mm Application: 1. The joint part of The Standard Test...

Brand Name:Lonroy

Place of Origin:China

IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test...

Brand Name:HJ

Model Number:HT-I02T

Place of Origin:China

Test Finger Probe Access Probes of IEC 60529 Jointed Test Finger With 50N Force Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) Figure 1 – Jointed test finger. IEC 61032 Protection of persons and equipment by enclosures –Probes for verification Figure 2–Test probe B. And other standard such as IEC 60335-1, IEC60884-1, IEC 60598-1, IEC60065-1, IEC...

Brand Name:Sinuo

Model Number:SN2210-7T

Place of Origin:China

IEC 60335-2 Rigid Finger Test Probe 11 With Force 50N Product Information For Rigid Finger Test Probe 11: This rigid finger probe conforms to the standard requirement of IEC IEC60335-2-6 clause 22, IEC60335-2-9 clause 22, IEC61032 figure 7 device 11, ...

Brand Name:kingpo

Model Number:IEC60335-1- clause 20.2.

Place of Origin:china

... with circular stop face Φ 50 mm 1.Knurled Finger Diameter:12mm 2.Knurled Finger Length:80mm 3.Baffle Plate Diameter:50mm 4.Baffle Plate Length:100mm 5.M6 thread at the end of the probe(can be connected to the ...

Brand Name:KINGPO

Place of Origin:China

...IEC 60132/60335 standard Test Probe Pin Thorn Kit are the necessary items for household and similar electrical appliances anti-electric shock protection test. The test kit consists of : No. Item Name Stadanrd 1 Test Probe B IEC 61032 figure 2 2 Test Probe 13 IEC 61032 figure 9 3 Test Probe 41 IEC 61032 figure 16 1. Stadard Test Probe B HT-I02: Bending finger...

Model Number:TP02

... the protection of person aganist access to to harzardous parts of an IP2 code.Also used to verify protection from access with the back of the hand for an IP suffix B code. Standard test finger probe is made of plastic and steel,very precision.

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

IEC 62196 Jointed Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger...

Brand Name:PEGO

Model Number:PG-TPB/PG-TP11

Place of Origin:China

.... The standard test finger probe is intended to verify the basic protection against access to hazardous parts and also be used to verify the protection against access with finger. The Unjointed test finger probe may be used to verify the protection of

Brand Name:SHC

Model Number:SC-F2B

Place of Origin:China

...Test Probe B standard test finger Shell anti electric shock with thrust 10N 20n 30n Specification and technical parameters: Parameters /Model SC-F2B SC-F2B -A SC-F2B -B SC-F2B-F Name Standard test finger Circular baffle test finger Large baffle test finger Standard test finger...

Brand Name:GESTER

Model Number:GT-MB06

Place of Origin:China

...ts of toys can be touched. If it is accessible, then conduct the related test according to standards so as to reduce the damage hazards for children. This tools include 2 models: Probe A and Probe B: 1. An accessible part for a toy or article intended for

Brand Name:Kinte

Model Number:WH-8601

Place of Origin:Guangdong,China (Mainland)

GB4706.1 Standard Test Finger Pin Electrical Test Probes WH-8601 Standard test finger, pin (test probe), pin: meet the standards: GB4706.1, GB8898-97, GB2099.1-96, IEC884-1 the corresponding provisions of the requirements.

Brand Name:YUYANG

Model Number:YYT010C

Place of Origin:China

Test Finger Probe Toys Testing Equipment For Children Toys Testing Equipment Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Test...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-B

... Technical Parameters: 1, Knurled Finger Diameter:12mm 2, Knurled Finger Length :80mm 3, Baffle Plate Diameter :50mm 4, Baffle Plate Length : 100mm 5According to :IEC60065, IEC 60335-1, IEC 60529, IEC60884-1, IEC60950, IEC61032, IEC69745-1 Application:

Brand Name:kerang

Model Number:HT-I22

Place of Origin:CHINA

Test Finger Nail HT-I22 Standard:IEC 60335 figure 7. Application:It is applicable for the non-removable components which are used for electric shocking water or touching the movement parts to see whether they can go through the mechanical stress that happened in normal use. Thus to judge the components conform to the required protection grade or not. Test...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Test Finger is a precision test probe made according to Figure 7 (Fig. 7) of the IEC 61032 (Test probe 11) and is used to simulate a human finger. It is also used by the standards of IEC 60335, IRAM 4220-1 and in most of the rules involved in the verification of accessibility to live parts.The Rigid Test Finger was made on stainless steel and Polyamide handle. Applicatiopn 1.The joint part of The Standard Test

Brand Name:HOOHA

Model Number:HOOHA-IEC 60335

Place of Origin:DONGGUAN

....1, IEC 60335, complying with CCC, UL, VDE, CSA, JIS test standards, which is an ideal instrument for safety withstand voltage test of wires and cables, household appliances, industrial appliances, electrical, chemical and medical instrumentation, and the

Brand Name:HOOHA

Model Number:HOOHA-IEC 60335

Place of Origin:Guangdong

....1, IEC 60335, complying with CCC, UL, VDE, CSA, JIS test standards, which is an ideal instrument for safety withstand voltage test of wires and cables, household appliances, industrial appliances, electrical, chemical and medical instrumentation, and the

Brand Name:szcx

Model Number:CX-T2B

Place of Origin:china

...Finger Diameter:12 mm Knurled Finger Length:80 mm Baffle Plate Diameter:50 mm Baffle Plate Length:100 mm Baffle thickness:20 mm Material:Stainless Steel. Handle:Nylon According to:IEC 61032, IEC 60335-1, IEC 60529-2001, IRAM 4220-1, SASO/IEC 60335-1, SASO IEC 60950, IEC...