iec 60335 1 clause 14 impulse test generator

Brand Name:Sinuo

Model Number:SN1104

Place of Origin:China

IEC 60335-1 Clause 14 Impulse Test Generator Max. 12.5kV Transient Over Voltage Testing Product Information: Standard: Conform to IEC 60335-1 clause 14, etc. Application: It is used to detect the transient over voltage of the components and the electrical clearance and the creepage distance. Test...

Brand Name:kingpo

Model Number:KP-1951S

Place of Origin:china

Impulse voltage test generator and monitor ,IEC 60335-1-Clause 14 Impulse test generator 1. Test pulse waveform: 1.2/ 50uS 2.The waveform error is ±20%; 3.The output pulse voltage is 0 ~ 10kV, which can be adjusted continuously； 4.The accuracy of voltage ...

Brand Name:Sinuo

Model Number:SN1104-20KV

Place of Origin:China

IEC 61851 High Voltage Impulse Test Generator for EV Charging Equipment Complied Standards & Clauses The Impulse Test Generator conforms to the standard requirements of IEC 61851-1 clause 12.7, IEC 61851-23 clause 11.4, etc. Equipments Overview It is used to verify that the appliances shall withstand the transient over-voltages to which they may be subjected. The impulse voltage test is a destructive test in which a breakdown occurs if the test

Brand Name:HongCe

Model Number:HJ0602

Place of Origin:China

...Clause 14 High Voltage Impulse Generator With Wave Shape 1,2/50 µs IEC60335-1 Clause 14 Transient overvoltages Appliances shall withstand the transient over-voltages to which they may be subjected. Compliance is checked by subjecting each clearance having a value less than those specified in Table 16 to an impulse voltage test. The impulse test voltage has a no-load wave shape corresponding to the 1,2/50 µs standard impulse...

Brand Name:Pego Electronics

Model Number:LSG-255

Place of Origin:China

...Impulse Voltage Generator for Impulse Dielectric Withstand Test for EVCS 1. Introduction The impulse voltage generator has a no-load wave shape corresponding to the 1.2/50ms standard impulse specified in IEC 61180 clause 7.1.2.1. The output impedance of the impluse generator is 500Ω and 2Ω, and test voltage can up to 15KV. It can meet the test requirements of IEC60664-1 clause 6.2.2.1 and IEC61851-1 clause...

Brand Name:HJ

Model Number:HJ0608A

Place of Origin:China

... 23.3 and 25.14, figure 8. Application: It is used to check the power cord flexing (bending) resistance performance of the small household appliances (such as Coffee pot / ...

Brand Name:SHC

Model Number:SC-F1218

Place of Origin:China

IEC 61032 Figure 12 Test Probe 18 Small Finger Probe Ф8.6 This probe conforms to the standard requirements of IEC 61032 figure 12 test probe 18, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children...

Brand Name:JLX

Model Number:LX-IPX34B

Place of Origin:Made in China

...testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of the test apparatus pivots about a horizontal axis through the center lines of the contact tubes of the socket-outlet at a distance of 8 mm behind the engagement face of the socket-outlet. Test