ic200etm001 ge expansion transmitter module

Brand Name:GE

Model Number:IC200ETM001

Place of Origin:US

...seven additional “racks” of VersaMax modules. Each expansion rack can include up to eight I/O and specialty modules, including the fieldbus communications modules. The Expansion Transmitter Module has a pass-though serial programming port that can be

Brand Name:GE Fanuc

Model Number:IC200ETM001

Place of Origin:USA

GE Fanuc New Bus Expansion Transmitter Module IC200ETM001 PLC Module Software Architecture GE Fanuc Automation makes no representation or warranty, expressed, implied, or statutory with respect to, and assumes no responsibility for the accuracy, ...

Brand Name:GE

Model Number:IC697BEM713

Place of Origin:USA

...required in a system than can be contained in the CPU rack. The BTM allows expansion from the CPU rack to a maximum of 7 additional IC697 PLC racks. It also provides a high performance parallel interface to the programming device. The module occupies a

Brand Name:GE

Model Number:IC200ERM001

Place of Origin:USA

...@mvme.cn (KLICK) QQ: 2851195450 Tel: 86-18020776792(KLICK) Skype:miyazheng520(KLICK) Product Details The IC200ERM001 is an Isolated Expansion Receiver Module designed by GE as part of the

Brand Name:General Electric

Model Number:IC200ETM001

Place of Origin:United States

... up to 7 additional racks. Each additional rack can hold up to 8 input / output modules, inclusive of field bus communication modules. It comes with a 26-pin female connector at the front of the module. The connector is used to connect the module to an

Brand Name:GE

Model Number:IC695LRE001

Place of Origin:USA

...GE FANUC IC695LRE001 RX3i Bus Transmitter Module 5.0V,132mA Technical Application The RX3i Serial Bus Transmitter Module, IC695LRE001, provides communications between a PACSystems RX3i Universal Backplane (IC695-model number), and serial expansion and remote backplanes (IC694- or IC693-model numbers). It translates the signal levels present in the Universal Backplane to the signal levels required by a Serial Expansion

Brand Name:GE

Model Number:IC695LRE001

Place of Origin:USA

...GE FANUC IC695LRE001 RX3i Bus Transmitter Module 5.0V,132mA Technical Application The RX3i Serial Bus Transmitter Module, IC695LRE001, provides communications between a PACSystems RX3i Universal Backplane (IC695-model number), and serial expansion and remote backplanes (IC694- or IC693-model numbers). It translates the signal levels present in the Universal Backplane to the signal levels required by a Serial Expansion

Brand Name:GE

Model Number:IC697BEM713

Place of Origin:USA

... module allows expansion from the main CPU rack when the system requires additional modules (up to seven added IC697 PLC racks). The high performance parallel programming function is an important feature. Additionally, this BTM is easy to ...

Brand Name:CiscoNetwork expansion moduleWS-X6748-GE-TX

Model Number:WS-X6748-GE-TX CiscoNetwork expansion module

Place of Origin:USA

...expansion moduleWS-X6748-GE-TX Gigabit Ethernet WAN Module NIM-2GE-CU-SFP brings high-density Small Form-Factor Pluggable (SFP) and copper (RJ-45) 1 Gigabit and 10 Gigabit Ethernet (GE) connectivity to the Cisco 4000 Series Integrated Services Routers (ISRs). Providing maximum flexibility, the modules...

Brand Name:Ge Fanuc

Model Number:IC697MEM715B

Place of Origin:USA

GE Fanuc IC697MEM715B Module New In Stock Description IC697MEM715B is a CMOS expansion memory manufactured by GE Automation and Controls. IC697MEM715 is available in different versions: 64 KB, 128 KB, 256 KB, and 512 KB. Typically these memories are used to expand the data and logic memory in CPU 772/771 modules or in the programmable co-processor module...

Brand Name:Cisco

Model Number:NIM-ES2-4=

Place of Origin:China

4-Port Gigabit Switch Module For Cisco ISR Layer 2 LAN Expansion Cisco Module The Cisco NIM-ES2-4= is a high-performance 4-port Gigabit Ethernet switch module designed for Cisco 4000 Series Integrated Services Routers (ISR). This compact yet powerful Cisco...

Brand Name:CISCO

Model Number:WS-X6148A-GE-TX

Place of Origin:CN/USA/MALAYSIA

...-X6148A-GE-TX= Brand Name: Cisco Product Model: WS-X6148A-GE-TX Product Name: 48-Port Classic Interface Module Product Type: Interface Module Technical Information Application/Usage: Data Networking Interfaces/Ports Interfaces/Ports: 48 x 10/100/1000Base-T

Brand Name:GE

Model Number:IC693APU305

Place of Origin:USA

GE FANUC IC693CHS391 , Expansion Plate With Ten Slots CPU I/O Base,Digital I O Module Product Description The GE Fanuc IC693CHS391 is an expansion plate with ten slots. This expansion plate is designed with a slot at the left end of the baseplate ...

Brand Name:CISCO

Model Number:SFP-GE-Z

Place of Origin:China, Singapore , Malaysia , Thailand , etc

...80km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The

Brand Name:BENTLY NEVADA

Model Number:128277-01

Place of Origin:U.S.A

Product Details: 128277-01 BENTLY Half Height Future Expansion Panel Half height design: This design allows the panel to be used in space constrained environments, such as small control cabinets or server racks. It is also easy to install side by side with...

Brand Name:Sourcelight or OEM

Model Number:SFP-GE-ZX

Place of Origin:Shenzhen,China

...Modules For GE / FC SFP-GE-ZX Specification P/N SFP-GE-ZX Datarate 1.25Gb/s Distance 80KM on sm fiber Wavelength 1550nm Transmitter DFB laser Receiver PIN Media SM fiber DDM/DOM YES Connector LC upc duplex Application Gigabit Ethernet Operating Temperature 0℃~ +70℃ Voltage Supply 3.3V Certification CE/FCC/RoHS/TUV/UL Brand Neuter, OEM Description 1000BASE-ZX SFP transceiver module...

Place of Origin:Shenzhen,China

Brand Name:AscentOptics/Neuter, OEM

Model Number:AOGC-XX24-R80

... DDM/DOM Digital (optional) Connector SC Application GE/FC Operating Temperature 0℃~ +70℃ Voltage Supply 3.3V / 5V Certification CE/FCC/RoHS/TUV/UL Brand ...

Brand Name:GE PLC

Model Number:IC210DAR020

Place of Origin:America

... controller of the GE series, which is the core of the automation system. The system adopts a modular design, with a wide range of expansion modules available, providing flexibility and scalability for complex automation projects.It is compatible with the

Brand Name:EMERSON

Model Number: IC694ALG221

Place of Origin:china

Technical specifications for IC694ALG221 Manufacturer Emerson Automation Series PACSystem RX3i Product Description Analog input module Manufacturer GE Intelligent Platform (GE IP); Emerson Automation (Current) Part Number IC694ALG221 No of Channels Four...