glow wire flammability testing equipment

Brand Name:PEGO

Model Number:GW-1

Place of Origin:China

...Glow / Hot Wire Flammability Testing Equipment for GWIT and GWFI Testing 1. Introduction of Glow Wire Flammability Testing Machine Glow wire flammability testing equipment is an electrical safety test designed to evaluate the flame resistant properties of plastic materials used in electrical devices. The purpose of glow wire flammability testing equipment...

Brand Name:YUYANG

Model Number:YY313

Place of Origin:China

...Using electricity heating regulation material (Ni80 / Cr20) of resistance wire (Φ 4 mm Ni-Cr alloy wire) to 0°C~ 1000°C in 1 min, then with 1.0 N vertically burn it 30s,measure the fire risk by product light-off or hold burning time ,also test light-off

Brand Name:Sinuo

Model Number:SN772C

Place of Origin:China

...IEC60695-2-13, it is required by IEC 60335 clause 30, IEC 60598, UL746A, etc. This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in s short time. It is suitable for

Brand Name:HongCe

Model Number:GW-1

Place of Origin:China

...o conforms to the standard requirement of UL746A. This device simulates the thermal stress caused by the heat source or ignition source such as the glowing elements or overload power within the short period of time, applicable to the fire hazard test for

Brand Name:Sinuo

Model Number:SN772C

Place of Origin:China

...Glow Wire Flammability Test Chamber Complied Standards & Clauses IEC60695-2-10 "Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure" IEC 60695-2-11 "Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end products (GWEPT)" IEC 60695-2-12 "Fire hazard testing - Part 2-12: Glowing/hot-wire...

Brand Name:AI

Model Number:GWFI

Place of Origin:CHINA

Glow Wire Flammability Testing Apparatus Introduction: This Glow Wire Flammability Testing Apparatus is designed according to IEC60695-2-10: 2000 standard "glowing filament test method". It is applicable to electrical and electronic products, household appliances and materials fire hazard testing, simulate burning elements or overload resistance and the like heat or ignition source thermal stress caused by a short time. Glow Wire Flammability

Brand Name:SKYLINE

Model Number:SL-7608

Place of Origin:China

Glow-wire Flammability Testing Equipment IEC60695-2-10~13 GB/T5169 Standards According to IEC60695-2-10~13,UL746A, IEC829, DIN695, VDE0471etc. Features 1.The ...

Brand Name:AISRY

Model Number:ASR-5660

Place of Origin:China

...Glow Wire Test Apparatus For Material Burning Testing Machine Product Introduction: Glow wire tester is used for electrician, its components, parts, solid electrical insulation materials or other solid combustible materials, in line with GB/T5169.10~13, IEC60695-2-1/0~2-1/3, GB2099 , VDE 0620, GB4706, UL817 test standards. Test method: Heat to the specified temperature with a standard resistance wire ring, and then make the glow wire

Brand Name:KINGPO

...Wire Flammability Test Equipment With UL 1581 Standards Electric Wire Horizontal-vertical Flame Apparatus Product information: The device is designed and manufactured in accordance with UL1581 standards and related requirements. It is applicable for the finished wire and cable, or soft-line to do 1060 vertical combustion and FT1 test, 1061 cable combustion test, 1080VW-1(vertical specimen) combustion test, 1090 electric wire...

Place of Origin:China

Brand Name:GC

Model Number:GC-ZRS-C

Glow Wire Flame Test Chamber With Manual Control Product Description This testing machine is mainly used to simulate the thermal stress caused by heat sources or ignition sources such as hot components or overloaded resistors in a ...

Brand Name:HUST Tony

Model Number:HTB-007

Place of Origin:china

Glow Wire Testing Chamber comply with IEC60695-2-10 -13:IEC 60335-1,IEC 60598-1 and IEC60745 Features: 1.0 They system comply with standards of IEC60695-2-10 :2013 ～ IEC60695-2-13 :2013,IEC 60335-1,IEC 60598-1 and IEC60745. 2.0 Glow wire material: Ni/Cr wire with 4 mm diameter 3.0 Temperature range: 50 ℃ ～ 960 ℃ 4.0 Current range: 0-200 Ampere 5.0 Input power: 220V/50Hz 6.0 Including thermocouple and 1℃ resolution display to monitor the wire

Brand Name:DAXIAN

Model Number:DX8368

Place of Origin:China

...smoke density developed according to the technical conditions stipulated in the standard GB/8323.2-2008 and ISO 5659-2 "Test methods for the determination of smoke density using the single chamber method for the production of plastic cigarettes".

Brand Name:Kinte

Model Number:WH-8901JK

Place of Origin:Guangdong,China (Mainland)

...Flammability Test Equipment 0.5M3 Glow Wire Test Apparatus ​ Glow wire test is IEC6 0695-2-10: 2000 ~ IEC6 0695-2-13: 2000 Glow Wire / Hot Wire, Basic Test Method, Glow-wire Test Device and General Test Procedure and UL 746A, IEC829 DIN695, VDE0471 The use of non-flame ignition source program simulation test project. Glow wire tester will specify the material (4Ni80 / Cr20) and the shape of the heating wire...

Brand Name:BAXIT

Model Number:BXT-GW

Place of Origin:Shanghai, China(mainland)

Glow Wire Tester Flammability Testing Equipment Glow wire tester is designed and manufactured according to the requirements of "Glow Wire Test Method" in IEC60695, GB5169.10-11 and GB4706.1. It is suitable for electric fire electronic products, household appliances and their materials for ignition hazard test...

Brand Name:SHC

Model Number:SC-GW01

Place of Origin:China

...the testing temperature of 550 ℃ ～ 960 ℃ for 1 min by using the glow wire tester with large current. Then using required pressure (1.0N) vertically burns the test sample for 30s. By observing whether the test sample and bedding object ignite or the

Brand Name:kingpo

Place of Origin:china

Model Number:KP-FT01

Glow Wire Tester, IEC60695-2-10 Flammability Testing Equipment ,Glow-wire apparatus Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A ,GB/T5169.10,GB4706.1.It makes required material(Ni80/Cr20) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test...

Brand Name:VOUCH

Model Number:5112

Place of Origin:CHINA

... products in accordance with the provisions of International standards. The control unit is supplied with all the controls and metering necessary to accurately set the temperature of the glow wire. The wire current is continuously variable by means of the

Place of Origin:China

Brand Name:KeRang

Glow Wire Tester GW-1 Standard:IEC60695-2-10, IEC60695-2-13 and UL746A. Application:This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and electronic products, household appliances and other material to do fire hazard testing. It is also used in the No flame ignition source fire test to test...