electrical components flame tester

Brand Name:kingpo

Model Number:KP-FT02

Place of Origin:china

... Tester is applied in the production and quality control department of lighting instrument, hypopiesis electrical apparatus, domestic appliance, machine electric appliance, electrical machine, power tool, electronic instrument, electrician instrument and

Brand Name:PEGO GROUP

Model Number:PG-NF

Place of Origin:China

... of IEC60695-11-5 and IEC60695-2-2 standard. The test machine specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess product and material’s ignition risk and fire retardance by a

Place of Origin:China

Brand Name:CHENGFENG

... products. This machine simulates the small flame generated inside the product under fault conditions, and uses simulation technology to evaluate the fire hazard. Needle height: more than 35mm (inner ...

Brand Name:BAXIT

Model Number:BXT-JL

Place of Origin:Shanghai, China(mainland)

...Flame Retardant Tester First, electrical casing flame retardant tester {PVC flame retardant electrical casing combustion self-extinguishing time (vertical combustion) tester} scope of use The flame retardant PVC electrical casing self-extinguishing burning time tester used for building cold bending electrical insulation flame retardant PVC casing and accessories flame...

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

...Flame Tester Plc Control The New IEC60695 Flammability Test Machine Products Introduction This part of IEC 60695 specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess the fire hazard by a simulation technique. It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical...

Brand Name:KINGPO

Place of Origin:Mainland China

...Flame Tester IEC Table Type By Small Flame IEC60695-11-5 Table Type Needle Flame Tester For Assessing The Internal Fault Conditions Caused By Small Flame Product Description According to IEC60695-2-2 and IEC60695-11-5 Needle Flame Tester is applied in the production and quality control department of lighting instrument, hypopiesis electrical apparatus, domestic appliance, machine electric appliance, electrical...

Brand Name:Kinte

Model Number:WH-8820

Place of Origin:Guangdong,China (Mainland)

... and manufactured for flame retardant cables for coal mines, flame retardant flame retardant cable connector test. Main technical parameters: 1. The operating voltage: AC220V ± 10% 50HZ ± 5% 2. The combustion chamber size: ...

Brand Name:Delta

Model Number:NFT

Place of Origin:China

...Electrical Parts Burning Testing IEC60695 Needle Flame Tester Introduction: NFT IEC60695 Needle Flame Tester uses a Φ0.9mm needle burner, use butane as gas source, burn the specimen at 45 ° angle. Then according to the specimen is ignited and burned time and burning length to evaluate the fire hazard of the small flames caused by the fault condition inside the equipment. NFT IEC60695 Needle Flame Tester...

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

...Components Combustion Tester for Roof Covering Materials In the era of renewable energy, solar panel installations have become ubiquitous. However, ensuring the fire safety of these installations, especially when used as roof covering materials, is of paramount importance. The IEC 61730 Solar Panel PV Module and Components Combustion Tester...

Brand Name:HJ

Model Number:NF-2

Place of Origin:China

...Flame Tester C60695-1-5 Standard Flame Height 12±1mm Flammability Testing Equipment Product Introduction NF-2 Needle Flame Tester is a professional Flammability Testing Equipment. This equipment is dedicated to accurately testing the flammability of products. By simulating the needle flame combustion scene, it provides a key basis for the fire safety assessment of products. It is widely used in electronics, electrical...

Brand Name:SKYLINE

Model Number:SL-7603S

Place of Origin:China

...Flaming Tester Ladder Type GB18380.31:2008, IEC60332-3-10:2000 Application Apply to evaluate suppression ability of spread of fire for bundles installed wires and cables ,under specified conditions. Standard According to IEC60332-3-10:2000,and GA306.1-2007. Main components Testing chamber, electric...

Brand Name:KeRang

Model Number:NF-1

Place of Origin:China

... to simulate the effect of a samll flame which may result from fault condition, in order to assess by a simulation technique the fire hazard. Test sample:Lighting, low-voltage electrical appliances, household appliances, machine tool electric appliance,

Brand Name:GOLD

Model Number:GD-VW-1

Place of Origin:China

... according to the international mainstream wire and cable flame retardant performance test standards (especially the VW-1 test method in the UL 1581 standard). The equipment is mainly used to evaluate the vertical combustion flame retardant performance of

Brand Name:DAXIAN

Model Number:DX8516

Place of Origin:China

... contact, etc., flames may be caused, which may then shoot onto nearby parts. The needle flame test simulates the small flames generated inside the product under fault conditions and evaluates the fire hazard using simulation technology. Test standards:

Brand Name:YUYANG

Model Number:YY140

Place of Origin:China

... of components or parts, poor contact, etc. may cause a flame, which may then be directed to nearby parts. The needle flame test simulates the internal part of the product. A small flame is generated under fault conditions and the risk of ignition is

Brand Name:COMPLORD

Model Number:EP-701C

Place of Origin:CHINA

...an advanced nitrogen-phosphorus-bromine (N-P-Br) synergistic flame retardant designed for polypropylene (PP) applications. This heavy metal-free (Sb₂O₃-free) formulation provides high flame retardancy with minimal halogen content, making it ideal for

Brand Name:JT

Model Number:JT8600

Place of Origin:HUBEI, CHINA

Electric Power Area Four Component Flame Retardant Epoxy Resin For CT / PT Product DetailsT TDS: JT 8600A Epoxy Resin 100 pbw JT ...

Brand Name:vouch

Model Number:5706

Place of Origin:CHINA

Cable Flame Tester of Bundle cable burner test machine Technical data: 1.)Model:5706 2.)Execute standard:GB18380.31.32 IEC60332-3-...

Brand Name:ZL

Model Number:ZL-1028

Place of Origin:China

...Flame Test Chamber VW-1 Flame Tester FT1/FT2 Flame Test Chamber Technical Description: The single wire and cable vertical burning tester is suitable for measuring the vertical burning non-invasive performance of single plastic wire, control wire, cross-linked, elevator, ship, mining cable and so on. Can also be made of high self-extinguishing low-smoke halogen-free flame...

Brand Name:AI

Model Number:VFT

Place of Origin:China

...Flame Tester is suitable for the measurement of limited flame spread properties of protective clothing. The flame from the burner is applied for 10 s to the surface or the bottom of textile specimens which are vertically oriented. Features: ISO 6941 Vertical Flame Tester...