deformed bar cold rolling machine

Brand Name:DIXUN

Model Number:DX-30000T

Place of Origin:China

... it can produce cold-rolled ribbed bars, cold-drawn spirals, plain round bars, twisted Angle square bars and cold-rolled twisted bars. B. all processes of this machine can be completed at one time, saving 40% of power, and only one to two people need to

Brand Name:SENDA

Model Number:SD0011

Place of Origin:China

cold rolling H13K Bar Steel shear knives for Steel Rod and Bar Steel Mills Senda Cold shears are used in continuous bar steel rolling facilities for industrial use. After heating of the steel mass, the steel rod and deformed steel rod/rebars from the ...

Brand Name:EDEST STEEL

Model Number:1045

Place of Origin:China

... is reduced, and it is easy to deform and crack during quenching. Therefore, heat treatment is extremely important, and it must be quenched after tempering to avoid temper brittleness. The machinability of this type of carbon steel can be improved by

Brand Name:Yushun

Model Number:Customized

Place of Origin:Jiangsu, China

Flying Shear - Installed After Intermediate Rolling Mill Used For TMT Bar / Deformed Rebar In the continuous rolling billet workshop or small section workshop, flying shear is placed in the back of the rolling line, and the rolling piece is cut into fixed ...

Brand Name:Unite Steel

Model Number:Round bar

Place of Origin:China

...Rolled Steel Bar Alloy Round Bar Steel Black/Peeled/Cold Drawn/Turned/QT 1.Grade: AISI 4140, DIN 1.7225/42CrMo4, JIS SCM440, GB 42CrMo 2.Size: dia 10-350mm length 2000-5800mm 3.Chemical composition:(%) C Si Mn P S Cr Ni Mo 0.42 0.30 0.60 ≤0.025 ≤0.025 1.00 ≤ 0.25 0.20 4.Factory state: Hot rolled or forged. Annealed hardness≤229. Black surface. 5.Characteristic: This steel has good workability, machining deformation...

Brand Name:CF STEEL

Model Number:S50C / 1.1210 / SAE1050 / C50

Place of Origin:China

...Rolled Carbon Tool Steel Flat Bar With Black Surface S50C / SAE1050 S50C Tool Steel Bar S50C steel is a high-strength medium carbon steel with low cold plastic deformation, poor weldability, poor hardenability but no temper brittleness and good machinability. Chemical Composition(%) C Si Mn P S Cr Ni Cu 0.47-0.53 0.15-0.35 0.6-0.9 ≤0.035 ≤0.035 ≤0.25 ≤0.25 ≤0.25 Regular hot rolled S50C flat bar...

Brand Name:takford

Model Number:C45/1045/S45C

Place of Origin:CHINA

...medium machinability, low cold deformation plasticity, poor weldability, no temper brittleness during heat treatment, but low hardenability. The critical diameter in water is 13 * 30MM, and there is cracking ...