aluminum waveguide fixed attenuator

Brand Name:CWJ

Model Number:WTA

Place of Origin:China

...waveguide attenuators. Typical Attenuation values are 3dB, 6dB, 10dB, 20dB and 30dB (other attenuation values available, consult sales engineers for details). The assembly construction includes a precision element for optimum electrical performance, but note that Attenuation vs. Frequency can vary greatly depending on the attenuation at a given frequency. Waveguide Fixed Attenuators...

Model Number:12VA-30

Place of Origin:Chengdu,China

Brand Name:Zysen

WR12 30dB Waveguide Fixed Attenuator ​ Zysen offer Waveguide Fixed Attenuator & Waveguide Variable Attenuator,WR10 to WR650, Power handling 0.25 to 100watts. Custom desgin according to requirment. P/N Frequency Range (GHz) WG Size Attenuation (dB) VSWR ...

Brand Name:Terui

Model Number:TRI-SMAMF-25-6-20

Place of Origin:China

...Fixed Attenuators N RF Fixed Attenuator is used to reduce the signal level. The general reason for wanting to reduce the signal level may be to avoid receiving a signal with too high a level in a hierarchical circuit, or to meet the need to control the signal level in an application. n RF Fixed Attenuator usually consists of a resistor network that allows heat to escape at a certain rate. As a RF Fixed Attenuator...

Brand Name:CFO

Model Number:fiber optic attenuator

Place of Origin:China

...Fixed Attenuator White For CATV , Female - Male Fiber Optic Attenuation Fiber Optic Attenuator is used in a wide variety of applications and can satisfy almost any requirement where a reduction in power is needed. 1. Features: Fixed Attenuator(Fixed Type FC, SC, ST, LC) Female to male type ( FC, SC, ST, LC) In-Line Attenuator(Fused and Fiber Jumpers Type) High Return Loss(In-Line and High RL Type) Exact and Stable Attenuation...

Brand Name:YLT

Model Number:Attenuators

Place of Origin:China

...Fixed Attenuators 100w 50Ω N Connector Max VSWR 1.3 1.35 1.4 DC-6 DC-3 200×142×65mm Coaxial fixed attenuators are used in absorbingenergy of transmission line ,expanding power range and controlling power level, also used in accurately measuring power or spectrum of RF microwave transmitters accompany with small power meter, comprehensive tester or spectrum analyzer. Model Power Rating(W) Frequency(GHz) Max VSWR Attenuation...

Brand Name:YINGDA

Model Number:ATTN-LCA-01-B05

Place of Origin:china

... type, the other end is adapter type (known as male to female) . Male to female type fixed attenuator is mainly applied to the optical link optical power attenuation in order to get the target required power. It mainly have types: SC, LC, FC, ST, MU.

Brand Name:INTEPON

Model Number:Adapter type fiber attenuator

Place of Origin:China

...attenuator, FC adapter type, 1260~1650nm, 1dB, 3dB, 10dB fixed attenuation. The attenuation of the adapter fiber attenuator is fixed. It is different from the in-line variable attenuator. The appearance of it likes the standard adapter but it's not the same thing. The fixed attenuator can be used for fiber patch cord in a light link. Features Structure: Adapter type Attenuation...

Brand Name:Geehe Comm

Model Number:GH-AT-SM-007

Place of Origin:Wuhan,China

...Fixed Attenuator For WDM Product Description: This Fiber Optic Attenuator, Fixed - SC/UPC 20dB is necessary to prevent over saturating an optical receiver when the optical power is too high. Using attenuators will ensure low bit error rates and prevent damage to receiving components. SC male-female, 20db Geehe's Male to female fiber optic attenuators is doped fiber attenuators...

Categories:Fiber Optic Attenuator

Country/Region:china

... power. It is mainly used in the index measurement of optical fiber system, signal attenuation of short-distance communication system and system test. The product features are light weight, small size, high precision, good stability, easy to ...

Brand Name:SWT

Model Number:SW- DTS200G(F)(-E)

Place of Origin:China

200 W Coaxial Fixed Attenuators DC-18 GHz Connector N,TNC Description The coaxial fixed attenuator is suitable for any need to reduce the power level or circuit matching, can quantitatively absorb the energy in the transmission line, extend the power range...

Place of Origin:Jiangsu,China

Model Number:SMA-JK1W3G

Brand Name:OEM is available

... quality RF attenuator with low VSWR and low power. All kinds of N type male and female fixed attenuators. The average power ratings from 1 - 300 watts available in 3, 6, 10, 20 & 30 dB. Fixed attenuators from 1 Watt to 300 Watts Fixed attenuators from

Brand Name:OEM or OMC

Model Number:ST Female to Male Fiber Optic Fixed Attenuator

Place of Origin:China

... at the receiver. Female to male Fixed attenuators from us offer defined control of optical signals in both integrated and add-on products. Depending on the project or need, fixed attenuators can limit (attenuate) the amount of light passing through to

Brand Name:RMHs

Place of Origin:CHINA

...m hitting the bottom of the large vehicle, effectively protecting the safety of personnel and vehicles. This fixed buffer package is mainly suitable for temporary maintenance and construction on roads. The vehicle installed with the device is parked around

Brand Name:ZD

Model Number:ZD-AT-3.8GHz-30w/3dB NM/NF

Place of Origin:China

... equipment, its main purpose is: the size of signal adjusting circuit; in the comparative method for measuring circuit, available to direct the measured network attenuation values; Adjustable RF Attenuator Details: l

Brand Name:UNIFIBER-OEM

Model Number:UNFAFCU

Place of Origin:CHINA

... cable by controlling the amount of signal loss that is passed through the signal. Commonly used attenuation range is from 1dB to 20dB.The most commonly used type is female to male plug type fiber optic attenuator, it has the optical fiber connector at

Brand Name:FOCC

Model Number:FOCC - ATT004

Place of Origin:China

...Fixed Attenuator Dual Wavelength This kind of FC fiber optic attenuator is used in FC connections. FC fiber optic attenuators feature a proprietary type of metal-ion doped fiber which reduces the light signal as it passes through. This method of attenuation...

Brand Name:Sinoscite

Model Number:SNSD-204-060400

Place of Origin:Sichuan, China

... Model Bpf0.3-0.5gn-2947 Passband frequency 0.3-0.5ghz Insertion loss ≤0.5db Inhibition ≥40db@0.6-1ghz VSWR ≤1.5 Material Aluminum alloy Exterior color Painted black (no paint on the bottom) Power 600w Note N-K

Brand Name:HILINK

Model Number:HL-FA-SM-LC-FM-5

Place of Origin:China

...Attenuator Male to Female Fixed Attenuator 1db 5dB 10dB 20dB 25db Product Description Hlink attenuators are mainly used in fiber optic to debug optical power performance & optical instrument calibration correction & fiber signal attenuation. All parts of the attenuator canassemble well without difficulty. It is easy and comfortable to plug in and pull out the connector from these attenuators...

Model Number:LC / APC 7dB Fiber Optic Attenuator

Place of Origin:China

Fiber Optic Attenuator Single Mode LC APC 7dB Polarization Dependent Loss: ≤0.2dB Product Description: The fixed fiber optic attenuator can achieve the dual function of adapter and attenuators. Fiber Optic Attenuator is one kind of optical passive device...

Brand Name:KCO, Kocent Optec Limited

Model Number:LC/UPC, LC/APC, LC/PC

Place of Origin:Guangdong, China

Fixed FTTH LC UPC Fiber Optic Attenuator 5dB Plug Type Male To Female Overview: We are KOCENT OPTEC LIMITED, We can supply optical fiber optic attenuator with different type such as LC, SC, ST, FC, etc . We also can supply OEM, ODM servicer for optical fiber optic attenuator. Please contact with us by phone or by e-mail to get more informations about them. LC/UPC single mode fiber optic attenuator descroptions: Fiber optic attenuator...