36mm dia tapered button bit

Brand Name:MTH

Model Number:34mm

Place of Origin:CHINA

36mm Blue Mining Rock Hard Alloy Tapered Button Bit Tapered Button Bit Description: Our tapered button bit was from high quality cemented carbide and produced with heat treatment technology,which connected with tapered drill rod well for air leg or hand-held rock drill machine for drilling holes in gold and coal mining,marble and granite quarries,stone project, tunnel, water conservancy,etc. Tapered Button Bit Product Characteristic: 1. Button

Brand Name:SUVEC

Model Number:tapered button bits

Place of Origin:China

...Tapered Drill Bit 7 Buttons 38mm 36mm 34mm Taper Button Bits Tapered drill bits are widely used in mining and quarrying, with the advantages of higher driving efficiency, long service life, better powder exhausting and easier bit back, which combine well anti-wear and anti-impact carbide butttons and high-performance steel together. Our Tapered drill bits...

Brand Name:MIRCO

Model Number:Tapered Button Bit

Place of Origin:China

...taper cross bit. with carbide buttons hot pressed on bits bodies, it has good performace sna life time. usually used for middle-hard to very hard rock formation. Products Name 7° 11° 12° Tapered Button Bit Description With carbide buttons hot pressed on

Brand Name:MING

Model Number:MZ0736-11

Place of Origin:CHINA

...36mm Tapered Button Bits With 11 Degree Taper For Hard Rock Drilling In Quarry Product category: DTH taper drill bit Matched connection: 11 degree taper Diameter: 34mm KINGDRILLING DTH taper drill bit description: Varying rock formations and rock drilling applications call for varying tapers on tapered chisel drill bits. On contemporary drill rigs, 11° and 12° taper...

Place of Origin:China

Brand Name:Jinquan

Model Number:Threaded & Tapered

36mm Tapered Button Bits: We offer high quality of tapered button bits & tapered drilling equipments, these tapered drilling button bits are made with high quality of raw material through special heat treatment, various type suitable for afferent work site. The diameter of tapered bits is from 28mm to 43mm with 4 6 7 11 12 taper...

Place of Origin:China

Brand Name:MIROC

Model Number:4148300204-4148300222

...choose tapered button bits for faster drilling penetration rate. Different taper sizes have different characteristics when it comes to the “knock-off” index – the smaller angle will prevent the bit from spinning. • Suitable for small hole range •

Brand Name:OED/OEM

Model Number:36mm

Place of Origin:China

Diameter 36mm tapered button bit Small Rock Drilling Bits 7 Buttons Number of buttons: 7 buttons Tapered type: 7 degree Application: Mining Tapered Drill Bits Are Used In Granite And Marble Quarry, Gold Mine, Railway, Tunnel, Etc. For Drilling Packaging & ...

Brand Name:Kinglong drilling

Model Number:Tapered Button Bits

Place of Origin:China

Tapered Button Bits: Taper Degree: 6°, 7°, 11°, 12° Diameter: 30mm, 32mm, 33mm, 34mm, 36mm, 38mm, 40mm, 41mm, 42mm Buttons: 4, 5, 6, 7, 8 Flushing Water Hole Nos.: 1, 2, 3 Skirt: Short, Long The Tapered Button Bits are connected with the tapered rods through taper to finish drilling work. The Tapered Button Bits...

Brand Name:JCDRILL

Model Number:32,34,36,38,40mm-4,6,7,8,9buttons-7°，11°，12°

Place of Origin:China (Mainland)

... & blast, as well as roof bolting applications, as we are Chinese leading manufacture of rock drilling bits,we have rich experience in reseraching and producing .Our products are sold to many countries of the world and gained lots of trust and praise.Why

Brand Name:SOLLROC

Model Number:32mm-43mm

Place of Origin:China

.../32/33/34/35/36/37/38/40/42/48/50/55mm Tapered button bits:28/29/30/32/33/34/35/36/37/38/40/41/42/45mm Taper Angle (Degree):4 degree/ 6 degree/ 7 degree/

Brand Name:HZJX

Model Number:32 mm 34 mm 36 mm 38 mm 41 mm

Place of Origin:China

... drill bits with a wide selection of head diameters from 26mm to 48mm . With carbide buttons hot pressed on the bit skirts , tapered button bits have a good drilling performance and are excellent in longevity . We manufacture various tapered button bits in

Brand Name:QIDELI

Model Number:H22/H25

Place of Origin:PUTIAN FUJIAN CHINA

...buttons taper drill bits cold pressing and hot set type button bits PRODUCT INTRODUCTION Tapered Button Bits is suitable for mining,quarring,tunneling and so on. It is widely used for gound quarring and underground drilling. 1. Our button bits is made with supper quality carbide and aloy steel. 2. After our mature heat treatment process, the performance of the product has reached the best state.Our bits...

Place of Origin:China

Brand Name:EST

Model Number:all types

...buttons hot pressed on bits bodies, Tapered Button Bits have a very good drilling performance and long life time. Different diameters and taper degrees are available to suit different applications in mining, quarrying etc. We can supply long skirt and short skirt Tapered Button Bits. Comparing with tapered chisel bits and tapered cross bits, button bits...

Brand Name:TeamWhole

Model Number:DHD360 Button bit

Place of Origin:Changsha, Hunan, China

Alloy Steel 165mm Dia DTH Button Bits For DTH Drill Rig Carbide Button DHD360-165mm Button Bit DTH Bit For DHD360 Hammer For Blasting Hole Bit Face Selection: Flat face, Concave face, Convex face. Matched hammer Dia. Bit diameter No.× Button Dia.(mm) Air ...

Brand Name:New Diamond

Model Number:T45

Place of Origin:Hunan, China (Mainland)

...tapered chisel bits and tapered cross bits, button bits has higher technology, much longer primary drilling time and higher drilling efficiency. According to the tungsten carbide insert, tapered button bits can be divided into the types of hemispherical, conical andparabolic button, etc. Thread button drill bits...

Place of Origin:China

Brand Name:SANSUNG

Model Number:Taper Button Bit

... primary drilling time and higher drilling efficiency, so that the button bit is popular among the users. Our taper button bit is made of high quality raw material through special heat treatment, which ensures the high drilling performance. At present,