100kpa pneumatic bursting factor testing machine

Brand Name:REFOND

Model Number:RF306B

Place of Origin:Shen Zhen, China (Mainland)

REFOND Textile Testing Equipment Hydraulic Bursting Strength Tester Testing Standards ASTM D3786-06 BS 3424-6-B ISO 13938-1 ISO 3303-B ERT 80-4.02 GB/T 7742.1 Test Scope Testing the knitted, woven and non-woven fabric, paper and cardboard in the bursting...

Brand Name:TESTEX

Model Number:TF142C

Place of Origin:China

70mm Burst Distension Graphics Touch-screen Pneumatic Bursting Strength Tester Application Pneumatic Bursting Tester employs the pneumatic test method to determine how much bursting pressure a fabric has. Examples of fabrics this tester is used to test ...

Brand Name:GESTER

Model Number:GT-C12B

Place of Origin:China

ASTM D3786 1.50Mpa Pneumatic Bursting Strength Tester Application For determining the bursting strength of woven or knitted fabrics, non-woven, paper, leather and board by application of a pneumatic load under a rubber diaphragm of a specific area. Provide...

Brand Name:BXT

Model Number:GLO-620

Place of Origin:CHINA

...; 2. Pressure resistance and blasting test of the valve; 3. Static pressure and blasting test of various hoses and metal pipes; 4, water pressure testing; 5. Pressure resistance and blasting test of various petroleum tools; 6. Hydraulic strength and

Brand Name:ZL

Model Number:ZL-5031

Place of Origin:CHINA

YG032E Pneumatic Controlled Automatic Hydraulic Diaphram Bursting Tester INTRODUCTION Textile fabrics having no particular directions cannot be tested its strength in tensile testers;a multidirectional force generated by hydrostatic pressure is applied on ...

Brand Name:Lonroy

Model Number:LR-A168

Place of Origin:China

ISO 13938 IWS TM 29 Pneumatic Fabric Burst Strength Tester EDANA 80 Textiles Bursting Performance Tester Compliant with standard GB/T 7742.2-2015 Textiles - Bursting performance of fabrics - Part 2: Determination of bursting strength and bursting expansion...

Brand Name:NBSANMINSE

Model Number:PT

Place of Origin:CHINA

...Pneumatic Push In Machine Accessories Connector Sanmin Specification 1 Brass with good nice nickel plated. 2 BSPT thread (British Standard Taper Pipe Thread). 3 Each and every pcs was tested at 10kgs/cm2. 4 Thread with PTFE coating which can seal directly without any other seal material. Fluid : Air , Vacuum Operating Pressure : 0-1.0MPa Negative Pressure : -100KPa...

Brand Name:HSTECH

Model Number:HS-SL5331

Place of Origin:China

... Machine Introduction Using this screw locking machine to realizes the automatic conveying, tightening and testing of screws through various electric and pneumatic components. Through equipment to reduce the number of manuals and reduce the bad factors ...

Brand Name:Soft Robot Gripper

Model Number:SFG-FCA4-M5072

Place of Origin:Beijing,China

Pneumatic Soft Gripper - SFG-FCA4-M5072 Product Description The use of machine vision for inspection can not only eliminate the interference of human subjective factors, but also can quantitatively describe these indicators, avoiding the test results that ...