Categories | Drilling Mud Equipment |
---|---|
Brand Name: | Aipu |
Model Number: | APMC |
Certification: | API ISO |
Place of Origin: | China |
MOQ: | 1 sets |
Price: | 15000 - 30000 $ (USD) |
Payment Terms: | L/C, T/T |
Supply Ability: | 15 sets/month |
Delivery Time: | 10 days |
Packaging Details: | sea worthy or customized |
Rental: | No |
Condition: | New |
Warranty: | 1 Year |
Material: | Q345B, 16Mn, Q195-Q345, etc. |
Type: | APMC50, APMC100, APMC200, APMC250, APMC500 |
Processsing Type: | Casting/forging/welding |
After-service: | Engineers available to service machinery overseas |
Application: | Drilling Mud Slurry Water Sand Separation |
Machine type: | Rotary Drilling Rig |
Product Name: | mud recycling system / mud reclaiming system |
APMC mud reclaimer/recycler is widely used in the purification and recycling of slurry for the construction of hydropower, continuous concrete wall, slurry shield tunnel, horizontal directional drilling, etc. the equipment is increasingly becoming a necessity of civilized construction since it not only can cut down construction cost but also can reduce the pollution of the environment. It can provide you with the main advantages as following. Desanding Plant is the economic way for the mud recycling, it is popular for Bored Pile Slurry desanding plant, TBM slurry treatment, HDD (trenchless) as well as water well drilling, etc.
The slurry pump sucks the mud from the mud pit than enter into bottom layer screen of shale shaker (3) through buffer box(2), the coarse particles will be separated out and the mudflow to the mud storage tank (4) through the bottom layer screen of shale shaker(3). The centrifugal pump (5) takes mud from the recycling tank(4), and feed to desander cone (6) with pressure for centrifugal separation, the solids/sand was discharged to upper shaker(3) from the outlet nipple of the desander cone.
After the dewatering process of the upper shaker(3), the fine
solids were separated out. The mud passed the upper shaker screen
returns back to the recycling tank(4), the clean mud entered into
the intermediary tank(7) through desander cone overflow pipe. The
mud in the intermediary tank (7) will go out through outlet pipe
(9) or go back to the recycling tank (4) depends on the fluid level
in the recycling tank.
In the mud circulation process, there is a fluids level float
switch (8) between intermediary tank (7) and recycling tank (4), it
can balance the fluids level in the recycling tank(4). When mud
level is low in the recycling tank (4) the overflow from the
desander will enter the recycling tank (4) through the intermediary
tank (7). When the mud level is too high in the recycling tank (4),
the mud will overflow to the intermediary tank (7) and go out from
the outlet pipe (9). If operators want to get high-quality clean
fluids, the feeding capacity to the system can be reduced, and the
repeat cleaning process will get the result.
Such Mud Reclaiming/Recycling System is designed for mud cleaning and recovery of the bored pile, rotary drilling rig, anti-seepage engineering, cored drilling and etc., which can reduce costs and improve construction efficiency.
Model | Capacity | Separation Size | Water Content of Discharge | Power |
APMC50 | 50 m3/h | 30 micron | <50% | 18Kw |
APMC100 | 100 m3/h | 30 micron | <50% | 22Kw |
APMC200 | 200 m3/h | 60 micron | <50% | 50Kw |
APMC250 | 250 m3/h | 60 micron | <50% | 60Kw |
APMC500 | 500 m3/h | 60 micron | <50% | 145Kw |
APMC Mud reclaimer/recycler Details
Accumulated solids in the bore are often given as one key reason for the "stuck" drill pipe. A high volume of clean mud will "float" solids to the surface for disposal. Mud recycling increases the success rate of bores, reduces the expense for bentonite, and helps maintain a tidy job site. These mud recyclers provide two benefits: missing enough mud and removing solids from the returning fluid.