Dell Networking H-Series director-class switches based on Intel®
Omni-Path architecture
Intel® Omni-Path architecture delivers high performance and high
availability at a lower cost
Dell H-Series director-class switches offer 768 ports in 32-port
increments, each delivering 100 Gbps of performance and extending
to 19.2 Tb/s (Tb/s) of aggregated bandwidth. With advanced features
such as power, fabric, management module redundancy,
component-level diagnostics and alerting, and out-of-band
management, Intel OPA switches support high availability in an
integrated manner.
Innovative features take structural flexibility and usability to
new heights without compromising performance. For example, the
Packet Integrity Protection (PIP) feature enables high packet
reliability with latency-free error checking and link-level
recovery. If the physical path fails, Dynamic Lane Scaling (DLS)
maintains 75% of the link bandwidth, so the HPC workload can be
smoothly completed by the deadline.
Dell Networking H-Series Director - deterministic latency and
enhanced reliability
Deterministic delay
H-series switches help minimize the negative performance impact of
large transmission units (MTUs) on small messages, and also help
ensure interprocess communication (IPC) when sending large messages
(usually when storing messages) within a fabric (eg The Message
Passing Interface [MPI] message gets a consistent delay. This will
enable the switch to bypass large packets of lower priority,
allowing smaller packets of higher priority, resulting in more
predictable low latency across the fabric.
To help reduce latency, error detection and correction enhancements
cover zero detection load. If correction is required, the system
retransmits the packet from the last link location instead of the
sending node.
Dell Networking H Series Director - Key Benefits
Main advantage
Improves structural scalability, reduces latency, increases
density, and reduces cost and power consumption. These switches
significantly reduce structural procurement costs while reducing
space and power requirements.
Software management tools simplify installation and management from
small structures to large, complex structures
Support and warranty
Dell ProSupport Dell ProSupport Services and Tools
Reduce the time to resolve network problems. With Dell
SupportAssist technology, ProSupport and ProSupport Plus are
available 24/7 to contact technical experts and automate remote
monitoring, often proactively before you become aware of the
problem. Multi-vendor environmental services include third-party
collaboration assistance, configuration assistance, and practice
recommendations. With Dell support services and tools, you can
spend more time on your business goals and stay competitive.
Warranty
The basic hardware warranty includes three years of workday
hardware technical support and 90 days of software technical
support, as well as basic troubleshooting and next business day
repair or parts replacement services, so you can rest easy.
Technical Parameters
Characteristics / Model H9106-OPF H9124-OPF
Chassis
Branch module slot 6 24
Main module slot 3 12
Management module slot (minimum/maximum) 1/2 1/2
Power supply 2/3/4 6/7/12
(minimum / DC / AC redundancy)
Fan module 3 9
Maximum number of ports 192 100 Gb/s 768 100 Gb/s
Module
Branch module 32 100 Gb/s QSFP28 ports 32 100 Gb/s QSFP28 ports
Main module 96 internal midplane ports (3 32-port vane modules),
and 32 external ports 96 internal midplane ports (3 32-port vane
modules), and 32 external ports
Management port 1 10/100/1000 BASE-T 1 10/100/1000 BASE-T
USB port 1 serial Type A port 1 serial Type A port
Performance
Switched transmission rate 4.8 Tbps 19.2 Tbps
Multicast table size 8192 8192
Unicast table size 49151 49151
Size
size
7 RU, height: 31 cm x width: 44.7 cm x depth: 74.9 cm 20 RU (+1 RU
support bracket), height: 88.9 cm x width: 44.7 cm x depth: 74.9 cm
(High: 12.2" x Width: 17.6" x Depth: 29.5") (High: 35" x Width:
17.6" x Depth: 29.5")
Weight (complete configuration) 120.1 kg (264.7 lbs) 283.33 kg
(624.3 lbs)
Environmental parameters
Operating temperature 0 °C to 40 °C (32 °F to 104 °F) 0 °C to 40 °C
(32 °F to 104 °F)
Storage temperature -40 oC to 70 oC (-40 oF to 158 oF) -40 oC to 70
oC (-40 oF to 158 oF)
Operating humidity 5 % to 85% (no condensation) 5 % to 85% (no
condensation)
Storage humidity 5 % to 95 % (no condensation) 5 % to 95 % (no
condensation)
power supply
Power supply 180-240 V AC, 50-60 Hz 180-240 V AC, 50-60 Hz
Hot swappable yes
Typical power consumption 1.8 KW (copper cable) or 2.4 KW (all
fiber - 3 watts maximum) 6.8 KW (copper cable) or 9.4 KW (all fiber
- 3 watts maximum)
Maximum power consumption 2.3 KW (copper cable) or 3 KW (all fiber
- 3 watts maximum) 8.9 KW (copper cable) or 11.6 KW (all fiber - 3
watts maximum)
Availability
Power redundancy 3 (DC redundancy) / 4 (AC redundancy) 7 (DC
redundancy) / 12 (AC redundancy)
Ventilation from front to back, front to back