Sign In | Join Free | My china-telecommunications.com
china-telecommunications.com
Products
Search by Category
Home > Other Metal & Metallurgy Machinery >

300 Ton Plate Vulcanizing Machine For Silicone Cake Mould Or Kitchenware

Categories Plate Vulcanizing Machine
Brand Name: JC
Model Number: JC-300HF
Certification: LFGB CE SGS
Place of Origin: Guangdong China
MOQ: 1 set
Price: Price Negotiated
Supply Ability: 500sets per year
Delivery Time: 45 days
Packaging Details: Shrink Film Packing
Clamp Force: 300 ton
Platen Size: 700*800mm
Plunger Stroke: 300mm
Heating Plates Distance: 300-400mm
Tie Bar Distance: 785*380mm
Max Working Pressure: 20MPa
Motor Power: 10HP*2(7.5KW*2)
Heater Power: 24KW*2
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    300 Ton Plate Vulcanizing Machine For Silicone Cake Mould Or Kitchenware

    300 Ton Silicone Cake Mould Molding Machine Silicone Kitchenware Molding Machine

    Vulcanizing Machine Lock Ring Mechanism:

    • The lock ring mechanism of the vulcanizer is the core of the rear inflator. During operation, the tire is lifted by the movable beam cylinder, clamped between the upper and lower chucks, and is taken in by the sleeve of the sleeve, so that the lock shaft is pressed down along the hollow shaft, and the upper and lower chucks are evenly interlaced. . After the outer tire mouth and the steel ring of the chuck are closely matched, the lock ring is used for locking.
    • The locking action is driven by the lock ring cylinder to rotate the arm, locking the lock ring mechanism, and hitting the motor valve and the limit switch, so that the compressed air is filled into the tire casing from the air inlet of the upper tray. When the total pressure of the inner cavity of the tire is greater than the pressure of the small cylinder in the lock shaft, the upper chuck slowly opens to the position required by the width of the hub, and the block touches the limit switch, and the shaft of the beam is rotated by the transmission mechanism.
    • The lock ring mechanism adopts a motorized valve and a zero-voltage switch device as a chain protection measure, that is, the solenoid valve and the lock ring cylinder that control the inflation are interlocked, and only the tire is safely positioned, and the inflation can be performed.
    • When the lock ring mechanism locks the tire, the motor valve cuts off the air source of the lock ring cylinder, and the zero pressure switch can not open the lock ring mechanism to unload the tire when there is pressure in the inner cavity of the tire. When the tire is inflated, the locking mechanism can be opened by the lock ring cylinder only when the inflation pressure of the tire is discharged to a predetermined safety pressure.
    • The tire blocking rod is operated by the tire blocking cylinder. Before the tire slides down from the roller conveyor, the cylinder will raise the tire blocking rod to lower the tire in position. When the inflation is completed, the cylinder will lower the tire blocking rod and the tire can be discharged. The distance between the upper and lower chucks can be adjusted with the threads on the washer and the lock ring.
    • The transmission mechanism is suspended, and the lower part is supported by a double-layer spring damping mechanism, so that the beam is relatively stable and noise-free when rotated. After the beam is turned over, the upper movable beam is hooked by a safety hook.
    • The pitching mechanism on the left and right sides is used to change the position of the tire retaining rod and the limit rollers on both sides to adapt to various specifications of the tire, and to enable the tire to accurately enter the rear inflator. It consists of a handle, a shaft, a bevel gear, a screw, a sliding sleeve, a moving frame and a limit roller.

    Technical Theory of Vulcanizing Machine:


    When the vulcanizer motor is running, the oil enters the oil pump from the oil storage tank oil filter and enters the control valve through the oil pump drain pipe. At this time, if the manual control valve is in the closed position, the oil enters the oil cylinder through the control valve and the oil pipe, driving The plunger and the lower formwork platform are raised. As described above, when the pressure reaches the upper limit specified value, the electric contact pressure gauge contact control stops the operation of the oil pump motor, and the check valve is automatically closed, thereby maintaining the pressure in the cylinder (pressure gauge The upper limit to the true adjustment to the required working pressure, but not more than 16.0Mpa). The pressure is maintained down to the required minimum working pressure. The electric contact pressure gauge contacts control the oil pump operation. The oil pressure rises again until the vulcanization heating time is completed. When the motor stops. Open the mold to take the workpiece. Fix the mold between the upper and lower platforms. Generally, use the automatic temperature control electric heating tube to heat. After the rubber is heated for a few minutes, it is vulcanized to fix the performance and shape. The vulcanizing machine is somewhat like steamed steamed bread. Function.! If the manual control valve is opened, there is the lifting platform and the self-weight of the plunger, and the oil in the cylinder is pressed back to the storage tank through the cylinder manual control valve and the oil pipe. Drop hot plate, electrical contacts are controlled on the control valve and communicating with the cylinder.


    Plate Vulcanizing Machine Parameters:

    ModelUnit200HF300HF400HF500HF1200HF
    Clamping ForceTon2003004005001200
    Operation table sizemm550*560700*800850*8501000*10001600*2200
    Plunger strokemm250300300350350
    Distance ofmm250-350300~400300~400350~450350~550
    Thermo-plate
    Distance of Tie barmm650*320785*380940*4501105*4756 posts
    Die sinking typeTrack-Suspension-2RT-3RT-4RToptional optional optional optional optional
    Max OperatingMpa2020202020
    Pressure
    Motor Powerhp10*2(7.5kw*2)10*2(7.5kw*2)15*2(11kw*2)15(11kw)25(18.5kw)
    Electric HeatingKw13.5*224*226.4*236126
    Power
    Total PowerKw426374.847144.5
    Gross weightTon7.8151713.528.5
    Dimension(L*W*H)mm2930*2350*20503360*2970*22503660*3050*23501460*3600*23802350*5400*2950


    Machine Application Images:




    Buy 300 Ton Plate Vulcanizing Machine For Silicone Cake Mould Or Kitchenware at wholesale prices
    Send your message to this supplier
     
    From:
    To: Guangzhou Ju Chuan Machinery Co., Ltd.
    Subject:
    Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0