Machanically Polilshed Aluminum , Corrosion Resistance , High
|Description||Aging Resistance , Wood Grain Aluminium Profiles , Resist Fading ,
|Material||Aluminum Alloy 6063, 6061|
|Material Thickness(t)||t=1.0 / 1.2 / 1.4|
|Surface Treatment||Wooden, marble, etc. and depend on customer’s demand.|
|Color||Green, Grey, Black, White, (RAL series)etc.|
|Length||Normal length=6m or in customer's order|
|Shape||Square, Round, Flat, Oval, and according to customer's drawing.|
Building, Production Line, Decoration, Industrial,
Transportation,Door and window, etc.
|Advantages/Features||Providing colorful products with various mechanical performances to
adapt all kinds of architectural styles|
1. Pearl cotton foam for each aluminum profile ;
2. Wrap with shrink film exterior;
3. Packed according to customer request.
Mechanical polishing relies on the grinding and rolling action of
very small polishing powder to remove extremely thin metal on the
surface of the sample. Polishing is often used to enhance the
appearance of products, prevent contamination of instruments,
remove oxidation, create a reflective surface, or prevent
corrosion. In metallurgy, polishing is used to form flat, defect
free surfaces for microscopic examination of metals. Silicon based
polishing pad or diamond solution can be used in polishing process.
|Surface treatment||Oxidation , electro-coating|
|Surface catagory||High brightness|
|features||Corrosion-resistance, highly-wear-resistance, high surface
The aluminum mirror polishing liquid is developed on the basis of
the three acid polishing, and is the replacement product of the
three acid polishing. It has the advantages of simple process and
can form a reflective mirror and other three acid polishing
advantages. At the same time, it also overcomes the fatal weakness
of flow mark and yellow smoke. It is a rare technical breakthrough.
The characteristics are as follows:
1. The dripping can be dripped by any dripping. As the time of the
tri acid polishing bath is allowed to drop more than 30 seconds, a
large number of polished fluids (400 - 600kg/T) are brought into
the slots, causing huge loss of slots and 700-800 kilograms of
alkali treated waste water. In addition, such a short drop time has
a flow mark on the surface of the aluminum alloy, causing waste to
make tri acid to be polished. The product rate is less than 70%.
This product is added with corrosion inhibitor to solve the problem
of flow mark thoroughly. After the aluminum alloy leaves the
polishing liquid, the protective film formed by the corrosion
inhibitor makes the aluminum alloy and the medicinal liquid
successfully isolated, and can flow freely and no flow marks.
Therefore, the consumption of the drugs is greatly reduced (about
150-200kg/ tons), and the rate of finished products is greatly
2, no yellow smoke overflow, the decomposition of nitric acid is
effectively suppressed, polishing brightness is stable. A large
number of yellow smoke spills and seriously pollutes the
environment is another major obstacle to the popularization of tri
acid polishing. The amount of yellow smoke is too large, the
treatment is difficult and the cost is high. The decomposition of
nitric acid is too fast, and its concentration fluctuates too much,
which makes the surface of aluminum alloy alternating bright and
dark, and the yield is too low. The addition of inhibitors can
effectively control the decomposition rate of nitric acid, the
surface brightness of aluminum alloy is stable, and the yield of
products is greatly improved.
3, remove the polishing ash automatically and improve the quality
of polishing. After polishing the aluminum alloy, the surface
usually has a layer of polishing ash, which is difficult to remove
by ordinary method. Even after 20-30 minutes anodic oxidation, it
can still be attached to the surface of the aluminum alloy,
affecting the polishing quality. This product can also
automatically remove ash while polishing. The aluminum alloy is
clean after leaving the polishing tank, ensuring the polishing
4. Special method of concentrating bath reduces water content and
improves brightness greatly. The brightness of the polishing
material is inversely proportional to the water content of the
polishing fluid, and the higher the water content, the lower the
brightness. The water content of the tricarboxylic acid polishing
fluid is more than 10%. To reduce its water content is an effective
way to improve its polishing ability. Our hospital uses a special
concentration method to reduce the water content of the polishing
solution to less than 5%, and the brightness is 120% above that of
ordinary tri acid.
Please tell us the information below, and we will give the best
suggestion to you!
1. Where you intend to use the aluminium profiles?
2. If you have the estrusion drawing, send us and we develop the
3. Which color you want or tell us the architectural style you
4. Purchase quantity. It will convenient us to give you the best
Welcome to visit our company !
Choose us & contact us!