Manufacturer offer 1.75mm 3mm colorful ABS PLA filament
Relative to the ABS, PLA has the following advantages:
(1) PLA's processing temperature is low, can be processed at 185
(2) odor harmless, good smell like fried corn ;
(3) high strength, high stiffness, suitable for DIY players do
duplicate printer components;
(4) forming performance is excellent, thermoforming dimensional
stability, low shrinkage (0.3%),layers stick each other well;
(5) brightly colored, translucent color;
For customers, we are free to provide technical information
counseling, ensure a smooth PLA used, for the market often reflects the PLA block nozzle solutions and
non-stick hot bed.
Our PLA filament advantages compare to other ABS filament:
We select of premier grade ABS material, low water absorption, high
toughness. Factory direct sales, inexpensive, buy more, bigger
3, A(clear natural),B(toughness translucent color,our technical
innovation products),C(opaque color)
A(clear natural),C(opaque color)
No smole, taste like fried corn
No,smoke,taske like fried corn
Very low, no bubbles occur when printing even expose to air for
over half a year
High, much bubbles printing at high temperature after the filament
opened from seal packaging and exposed to air for a period( like
one month or shorter time)
Type A and C is not good toughness, B is good tough
Not good toughn
I . Before produce extruding filament ,we will dry ABS and PLA for
a enough time (3-5 hours).
II. Mix with colors masterbatch or colors powder, all which
.certified with ROHS.
III.Adjust temperature and dragging rate , make filament diameter
range at 1.6-1.8mm/2.8-3.0mm, roundness +/-0.05mm, each spool net
IV we put all filament spool in shelf, different kind in different
shelf, all categories arranged orderly.
2.Productiong quality control
I. we have diameter laser detect kits to control extruding rate on
line, when diameter smaller or higher than accept range, the laser
detect kits will adjust the extruding rate higher or smaller to
make diameter range at acceptable.
II.keep each record filament samples sent to customers, build a
tracking able document.
III.when the filament put on shelf longer than half a year, we will
dry the filament again.
3.About waste & recycle
Much time you will find some black filament is too brittle, that
added and mixed with some recycle and scrap after produced.
We haven’t produced with scrap outlet, rework&recycle material,
or dispose, but for quality assurance purpose.
We put each filament /spool on seal PE bag with desiccant , then
smaller carton, then out big box
We also have vacuum heated bag to replace of PE bag, make better
5.research and developing
we have engineers that specialty in color formulation ,plastic
modification, packaging, quality control ,producing control, we can
do according to your requirements .
we have colors:
Natural, white, black,red, sky blue, dark blue ,florescent green,dark green, florescent yellow, dark yellow ,orange, purple, pink, grey, brown,glow in dark etc